RTN250 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – LIT EPIP E® FOR SUR FACE MOU NT AND STA NDAR D LEDs

LITEPIPE ^®
LITEPIPE ^® FOR SURFACE MOUNT AND STANDARD LEDs
U.S. & Foreign Patents Issued and Pending
APPLICATION
VCC’s LITEPIPE ^® provides a method of transmitting the light of a surface mount LED to the display
panel. Both vertical and horizontal PCB surface mount LEDs can be displayed in this manner. The
LITEPIPE ^® is also capable of blending multicolor LED light into a single color.
INTENSITY
LITEPIPE ^® lightpipes have a unique near flush design and are still able to provide up to 160 degrees
of viewing angle. This light output is achieved by the use of a concave shaped receiving surface
which collects the LEDs light, and fresnel rings on the opposite surface that disperse the light.
VERSATILITY
The LITEPIPE ^® is available in .020 ˝ increments from .200 ˝ to 2.0 ˝. This wide range of lengths
simplifies the PCB positioning in relation to the display panel. Lightpipes are secured directly to the
display panel with no mechanical attachment to the PCB. The installation and removal of the circuit
board can thus be accomplished without disturbing the display panel.
INSTALLATION
LITEPIPE ^® products are easy to install. Slide the LITEPIPE ^® through the panel opening and slip the
retainer in place. Finish the installation by pressing the retainer up against the display panel.
SPECIFICATIONS
MATERIAL
LITEPIPE ^® - Acrylic, optical grade, (Clear)
Grommet - Polyethylene, (black)
Spring Clip - Spring Steel (nickel plate)
MOUNTING
Panel hole: round .171˝ Dia.(4.34mm).
square .180˝ x .180˝ (4.57mm x 4.57mm).
rectangular .170˝ x .250˝ (4.34mm x 6.35mm).
LITEPIPE^® from .200 ˝ to .500 ˝ use grommet retainer (RTN 150).
LITEPIPE ^® from .500 ˝ to 2.00 ˝ the spring clip (RTN250)
is recommended for rigidity.
LED
Surface mount, vertical and horizontal LEDs.
LITEPIPE ^® products for blending multicolor LEDs are available.
LITEPIPE ^® WITH VERTICAL SURFACE MOUNT LED
ORDERING CODES
LPC XXX CTP
MODEL
LPC (Round)
LPS (Square)
LPR (Rectangular)
RTN 150 (GROMMET)
RTN 250 (SPRING CLIP)
COLOR
CTP CLEAR
Equals length in inches
(Min. 020 = .200˝ / Max. 200 = 2.0˝ )
020 038 056 074 092 112 135 157 180
022 040 058 076 094 115 137 160 182
024 042 060 078 096 117 140 162 185
026 044 062 080 098 120 142 165 187
028 046 064 082 100 122 145 167 190
030 048 066 084 102 125 147 170 192
032 050 068 086 105 127 150 172 195
034 052 070 088 107 130 152 175 197
036 054 072 090 110 132 155 177 200
NOTE:
Round: .200˝ to 2.0˝ Square &
Rectangular: .300˝ to 2.0 ˝
(Not all sizes carried in stock.)
Special lengths available
upon request. Minimum order
quantity may apply.
OUTLINE DRAWING
LPR
LPS
LPC
MOUNTING COMPONENTS
RTN 150
RTN 250
Rectangular .190 X .270
(4.83mm X 6.86mm)
Square .200 X .200
(5.08mm X 5.08mm)
Round .190 Dia.
(4.83mm)
GROMMET
6
www.VCCLITE.com
[e-mail]
SPRING CLIP
1.800.522.5546