QPP-015 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – QuikPAC Module Data

QuikPAC Module Data
QPP-015
120W, 869-894MHz
Class AB Power Stage
General description:
The QPP-015 QuikPAC™ RF power module is an impedance
matched Class AB amplifier stage designed for use in the output
stage of linear RF power amplifiers for cellular base stations. The
power transistor is fabricated using Xemod’s advanced design
LDMOS process. The gate terminal is connected directly to the
control voltage pin, allowing direct control of the bias. The user must
supply the proper value of V_GS to set the desired quiescent current.
Standard Operating Conditions
Parameter
Symbol
Frequency Range
F
Supply (Drain) Voltage
V_D
Bias (Gate) Voltage
V_G
Bias (Gate) Current, Average
I_G
RF Source & Load Impedance
Ω
Load Impedance for Stable Operation (All Phases)
VSWR
Operating Baseplate Temperature
TOP
Output Device Thermal Resistance, Channel to Baseplate
Θjc
Maximum Ratings
Parameter
Supply (Drain) Voltage
Control (Gate) Voltage, VDD = 0 VDC
Input RF Power
Load Impedance for continuous operation without damage
Output Device Channel Temperature
Lead Soldering Temperature
Storage Temperature
Performance at 28VDC & 25ºC
Parameter
Supply (Drain) Voltage
Quiescent Current (total) (1)
Power Output at 1 dB Compression (single tone)
Gain at 24W PEP (two tone)
Gain Variation over frequency at 24W Output (two tone)
Input Return Loss (50 Ω Ref) at 24W PEP (two tone)
Drain Efficiency at 120W Pout (single tone)
Drain Efficiency at 120W PEP (two tone)
3^rd Order IMD Product (2 tone at 120W PEP;1 MHz spacing)
Symbol
V_D1,2
I_DQ
P_-1
G
∆G
IRL
η
η
Features:
Single Polarity Operation
Matched for 50 Ω RF interfaces
XeMOS FET Technology
Stable Performance
QuikPAC System Compatible
QuikClip or Flange Mounting
Min
Nom
Max
Units
869
894
MHz
26.0
28.0
32.0
VDC
3.0
3.5
5.0
VDC
2.0
mA
50
Ohms
10:1
-20
+90
ºC
0.8
ºC/W
Symbol
VDD
VG
PIN
VSWR
TSTG
Value
35
15
10
3:1
200
+190
-65 to +150
Units
VDC
VDC
W
ºC
ºC
ºC
Min
Nom
Max
Units
27.5
28.0
28.5
VDC
900
1,000
1,100
mA
120
130
W
13.0
14.0
dB
0.3
0.5
dB
12.0
14.0
dB
43
45
%
32
35
%
-30
-28
dBc
XEMOD RESERVES THE RIGHT TO MAKE CHANGES TO THIS SPECIFICATION WITHOUT FURTHER NOTICE. BEFORE THE
PRODUCT DESCRIBED HERE IS WRITTEN INTO SPECIFICATIONS OR USED IN CRITICAL APPLICATIONS, THE PERFORMANCE
CHARACTERISTICS SHOULD BE VERIFIED BY CONTACTING XEMOD.
Xemod QuikPAC Data
QPP-015
www.xemod.com
Rev. B (05/09/01) Page 1 of 2