PMM5301 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – HIC for 5-Phase Stepping Motor

HIC for 5-Phase Stepping Motor
PMM5301
PMM5303
Outline
PMM530 is a single packaged power hybrid IC of the switching elements to be used for driving 5-phase stepping motor.
This HIC has been developed for the purpose to further simplify the usage of 5-phase stepping motor. When combined only
with the controller IC to generate the excitation mode, this HIC can configure a driver device for a 5-phase stepping motor.
Characteristics
• High speed and high torque rotation by 5-phase pentagon system.
• Constant voltage and constant current PWM driving system (excited by others).
• Power voltage (driving power)
: VCC1=18~42V
• High output current
: 4A max. (1A/phase)
• Reduced heat generation by using MOSFET for the power drive element.
• The all-in-one packaging reduces number of parts around peripheral circuits.
• Two package types are available, enabling flexible PCB designing.
Maximum rating (Tc = 25˚C)
Item
Symbol
Condition
Rated value
Unit
Power voltage-1
VCC1 max
Without signal (25pin terminal)
52
V
Power voltage-2
VCC2 max
Without signal (5pin terminal)
7
V
Power voltage-3
VCC3 max
FET drive power (6pin terminal)
15
V
Phase current
IO max
1 pulse 100ms,TC=25˚C
7
A
Loss-1
PD max1
Single FET for phase switching,TC=25˚C
12.5
W
Loss-2
PD max2
Single FET for constant current control,TC=25˚C
27
W
Operating temperature on PCB
TC
No-condensing at a low temperature
0~105
˚C
Temperature at joint
Tj max
——————
150
˚C
Storage temperature
Tstg
——————
-40~125
˚C
Recommended operation condition (Ta = 25˚C)
Item
Power voltage-1
Power voltage-2
Power voltage-3
Power voltage-4
Output current
Phase driver withstanding voltage
Symbol
VCC1
VCC2
VCC3
VCCO
IO max
VDSS
Condition
With signal (25pin terminal)
With signal (5pin terminal)
With signal (6pin terminal)
With signal (24pin terminal)
Total current
ID=10mA(TC=25˚C)
Rated value
Unit
18~42
V
5.0±5%
V
12.0±10%
V
10~42
V
4
A
60min
V
343