|
PME271Y Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – EMI suppressor, class Y2, metallized paper | |||
|
PME271Y
⢠EMI suppressor, class Y2, metallized paper
⢠0.001 â 0.15 µF, 250 VAC up to +100, 300 VAC up to +115 °C
⢠The highest possible safety regarding
active and passive flammability.
⢠Self-extinguishing UL 94V-0 encapsulation
material.
⢠Excellent self-healing properties. Ensures
long life even when subjected to
frequent overvoltages.
⢠Good resistance to ionisation due to
impregnated dielectric.
⢠High dU/dt capability.
⢠Small dimensions.
⢠Safety approvals for worldwide use.
⢠The capacitors meet the most stringent
IEC humidity class, 56 days.
TYPICAL APPLICATIONS
CONSTRUCTION
⢠The impregnated paper ensures
excellent stability giving outstanding
reliability properties, especially in
applications having continuous
operation.
L
B
The capacitors are intended for use as
Multi-layer metallized paper. Encapsulated
interference suppressors in Y2 (line-to-earth) and impregnated in self-extinguishing material
applications.
meeting the requirements of UL 94V-0.
TECHNICAL DATA
p ± 0.5
â
d
PME271Y PME271YA-E
Rated voltage VAC, 50/60Hz 250
Capacitance range µF
0.001â0.1
300
0.001â0.15
d = 0.6 for p = 10.2
0.8 for p = 15.2, 20.3, 22.5
1.0 for p = 25.4
Temperature range °C
Climatic category IEC
Capacitance tolerance
Approvals
Dissipation factor tanδ
Insulation resistance
In DC applications
Resonance frequency
Test voltage between
terminals
â40/+100 â40/+115
40/100/56/B 40/115/56/B
± 10% for C > 0.1 µF, code K. ± 20% for C ⤠0.1 µF, code M
S, N, D, FI, VDE, SEV, IMQ, UL, CSA
⤠1.3 % at 1 kHz
C ⤠0.33 µF ⥠12000 Mâ¦
Measured at 500 VDC after 60 s, +23°C
Recommended voltage: ⤠1000 VDC
Tabulated self-resonance frequencies f0 refer to 5 mm
lead lengths.
The 100% screening factory test is carried out at 3000 VDC.
The voltage level is selected to meet the requirements in
applicable equipment standards. All electrical characteristics
are checked after the test.
l = standard 30 +5/-0 mm (code R30)
option short leads, tolerance +0/-1 mm
(standard 6 mm, code R06)
Other lead lengths on request.
dB
Attenuation
70
0.47 µF
60
0.047 µF
50
40
0.0047 µF
30
20
10
0
1
3 5 10
f
30
100 200 MHz
Suppression versus frequency. Typical values.
Vibration
ENVIRONMENTAL TEST DATA
IEC 60068-2-6, Test Fc 3 directions at 2 hour each,
No visible damage, No open or short circuit
10 â 500 Hz at 0.75 mm or 98 m/s2
Bump
Solderability
IEC 60068-2-29, Test Eb 4000 bumps at 390 m/s2
IEC 60068-2-20, Test Ta Solder globule method
No visible damage, No open or short circuit
Wetting time
for d ⤠0.8 < 1 s
for d > 0.8 < 1.5 s
Active flammability EN 132400
Passive flammability IEC 60384-14 (1993), EN 132400
Humidity
IEC 60068-2-3, Test Ca +40°C and 90 â 95% R.H.
56 days
165
|
▷ |