PJ317 Datasheet, PDF (1/11 Pages) List of Unclassifed Manufacturers – 3-Terminal Adjustable Output Positive Voltage Regulator

PJ317
3-Terminal Adjustable Output Positive Voltage Regulator
T he PJ317 is adjustable 3-terminal positive voltage
regulator capable of supplying in excess of 1.5 A
over an output voltage range of 1.25 V to 37 V. This voltage
regulator is exceptionally easy to use and require only two
external resistors to set the output voltage. Further, it
employs internal current limiting, thermal shutdown and
safe area compensation, making it essentially blow-out
proof.
F_•EA_OTU_utpR_uE_t S_{Current in Excess of 1.5 Ampere}
• Output Adjustable between 1.25 V and 37 V
• Internal Thermal Overload Protection
• Internal Short-Circuit Current Limiting
Constant with Temperature
• Output Transistor Safe-Area Compensation
• Floating Operation for High Voltage Applications
• Standard 3-lead Transistor Packages
• Eliminates Stocking Many Fixed Voltages
ORDERING INFORMATION
Device
Operating
Temperature
PJ317CZ
PJ317CM
PJ317CT
PJ317CP
PJ317CW
PJ317CS
-20℃ to 85℃
CIRCUIT SCHEMATIC
Package
TO-220
TO-263
TO-92
TO-252
SOT-223
SOP-8
Design
Load
Current
1.5A
1.5A
0.1A
0.5A
1A
0.3A
TO-220
TO-220 / TO-263 / TO-
92/ TO-252 / SOT-223
TO-263
Pin 1. Adjust
2. Vout
3. Vin
Heatsink surface
connected to Pin2
TO-92
TO-252
SOT-223
SOP-8
Pin 1. Vin
2. Vout
3. Vout
4. Adjust
5. Nc
6. Vout
7. Vout
8. Nc
STANDARD APPLICATION
* = Cin is required if regulator is located an appreciable distance from power supply filter.
** = Co is not needed for stability, however it does improve transient response.
V_out = 1.25 V (1 + R₂ / R₁ ) + I_Adj R₂
Since I_Adj is controlled to less than 100 µA, the error associated with this term is negligible in most applications
1-11
2002/10.rev.A