PH300 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – PEAK HOLD DETECTOR

AMP TEK
PEAK HOLD DETECTOR
PH300
STATE-OF-THE-ART
PERFORMANCE
• High Speed (250 ns rise time)
• Extremely Low Droop Rate (10 nV/µs)
• Low Power (< 36 mW)
• Ramp & Dump Hold Discharge
Model PH300 is a high performance, thin film hybrid, peak-hold unit, designed to track and hold the peak of analog input signals with
rise times (10% to 90% of Vmax) as short as 250 ns. The unit also has the lowest Droop Rate of the held voltage available and
consumes less than 36 mW of power in quiescent mode.
While this unit was designed for use in satellite instrumentation, the following unique characteristics make it equally useful in a broad
range of space, laboratory and commercial applications.
FEATURES
• Operates from -55 to +125 °C
• Small size (16 pin hybrid DIP)
• Very low power (36 mW quiescent)
• High speed
• Low droop rate
• Ramp discharge
• Fast reset
• Build-in linear gate
• Internal hold capacitor
• High reliability screening
• One year warranty
APPLICATIONS
• Aerospace
• Portable instrumentation
• Nuclear monitoring
• Particle, x-ray and gamma ray detection
• Imaging
• Research experiments
• Medical and nuclear electronics
• Electro-optical systems
TOP VIEW
0.100 TYP.
[2,540]
16
0.600
[15,240]
1
9
0.80
[20,32]
8
0.95
[24,13]
SIDE VIEW
0.19
[4,83]
0.20
[5,08]
0.018 TYP.
[0,457]
DIMENSIONS: ^inches
[mm]
AMPTEK, INC. 6 DE ANGELO DRIVE, BEDFORD, MA 01730 U.S.A.
TEL: [phone] FAX: [phone] email: [e-mail] http://www.amptek.com