PFR Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Polypropylene film/foil capacitor

PFR
• Polypropylene film/foil capacitor
• According to IEC 60384-13
TYPICAL APPLICATIONS
CONSTRUCTION
High speed applications requiring low
losses at high frequencies and high dU/dt.
Typical applications electrical ballasts,TV/
video, telecommunications.
Capacitor with polypropylene film and
metal foil electrodes. Radial leads of tinned
wire are electrically welded to the winding.
Encapsulation in self-extinguishing material
meeting the requirements of UL 94V-0.
7.2 max
B max
H max
4+1
5.0 – 0.4
∅ 0.5
Rated voltage U , VDC
R
Rated voltage U , VAC
R
Capacitance range, pF
Capacitance tolerance
DC Test voltage
Temperature range
Climatic category
Capacitance drift
Temperature coefficient
Self inductance
Dissipation factor tanδ
Insulation resistance
GENERAL DATA
63
100 250 400 630 1000
40
63
160 220 250 250
100– 100– 100– 100– 100– 100–
22000 10000 6800 6800 4700 680
Capacitance measured at f=1kHz, T=20°C
For C ≤ 1000 pF, f = 100 kHz.
±10%, ±5%, ±2.5%, ±2%, ±1%
2 x U_R for 2s
–55 ... +100°C
An operating temperature up to +105°C is allowed
under certain conditions. For details consult Evox
Rifa.
IEC 60068-1, 55/100/56
DIN 40040, FMD
Max. 0.3% after a 2 year storage period at a
temperature of +10° ... +40°C and a relative humidity
of 40 ... 60%.
–200 (+50, –100) ppm/°C (at 1 kHz)
Approximately 6 nH/cm for the total length of
capacitor winding and leads.
Maximum values at +23°C
C≤1000 pF 1000 pF<C≤4700 pF C>4700 pF
1 kHz ≤ 0.04%
10 kHz ≤ 0.04%
100 kHz ≤ 0.05%
0.04%
0.05%
0.07%
0.04%
0.07%
Measured at +20°C, according to IEC 60384-13.
Minimum value between terminals: 500 000 MΩ
214