OLI400 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – Miniature Low Input-Current Optocoupler

ISO
LINK
OLI 400
Miniature Low Input-Current
Optocoupler
For Hybrid Assembly
6
CATHODE
5
4
VCC VOUT
ANODE
1
Shield
GND
3
.100"±.01"
6
54
Minimum Bonding pad size
.005"X .010", 6 places
Device color
code*
1
23
.110"±.01"
SCHEMATIC
* OLI 400 Color code - Yellow
PACKAGE OUTLINE
Features
♦ Electrical parameters guaranteed over
-55°C to +125°C ambient temp. range
♦ 1500 Vdc electrical isolation
♦ Low input current - 0.5 mA
♦ Low output Vce-sat - 0.1V typical
♦ High current transfer ratio - 1000% typ.
♦ Low power consumption
♦ Similar to industry standard parts
6N138 / 6N139 in plastic and 6N140 in
hermetic DIP packages.
♦Radiation tolerant
Description
The OLI 400 has high current transfer ratio
at very low input currents making it ideal for
applications such as MOS, CMOS, and low power
logic interfacing or RS-232C data transmission
systems. Each OLI 400 has a light emitting diode
and an integrated photodiode-darlington detector
IC mounted and coupled in a miniature custom
ceramic package providing 1500 Vdc electrical
isolation between input and output. The darlington
detector has an integrated base - emitter resistor
for superior high temperature performance. The
split darlington design permits lower output
saturation voltage and higher switching speed
operation than possible with conventional
photodarlington design.
Device mounting is achieved by standard
hybrid assembly with non-conductive epoxies.
Gold or aluminum wire bonding can be used to
make electrical connections for maximum place-
ment flexibility ³.
Notes:
1. Measured between pins 1 and 6 shorted together and pins 2, 3, 4, and 5 shorted together. T_A =25°C and duration = 1 second.
2. Current transfer ratio is defined as the ratio of output collector current, Ic to the forward LED current, I , times 100%.
F
3. Certain cleaning process may be harmful to this device; consult factory for details