OA5669 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Safety relay

Safety relay
OA / OW 5669
• according to EN 50 205, IEC/EN 60 255,
IEC 60 664-1
• with positively driven contacts
• wash proof model as option
• double and reinforced insultaion between
contact sets according to EN 50 178
• low rated power consumption
• high mechanical service life
• compact size, small height
• Approvals: UL, CSA,
TÜV approval: R 9012316
Applications:
ZH1/457 press controls
Switchgear for safety technology
OA / OW 5669
Technical data
Relay type
1. 0 Relay coil
1. 1 Nominal voltage
1. 2 Nominal consumption
DC V
W
OA 5669
5, 6, 12, 20, 24, 48, 60, 110
0,7
2. 0 Contacts
2. 1 Contact arrangement
1 NC / 1NO
2 changeover contacts, 1 No and 1 changeover contact
2. 2 Contact material
AgCdO + 0,2 µm Au; AgNi 10 + 0,2 µm Au optionally + 5 µm Au
2. 3 Rated insulation voltage
AC V
250
Switching voltage min./max.
V
AC/DC 10 / DC 250, AC 400 (AC/DC 100 mV / 60 V) ¹⁾
2. 4 Limiting continuous current
A
2 x 5 (see operating voltage limit curve)
Switching current min./max.
A
10mA³⁾ / 8 (1 mA / 0,3 A)¹⁾
2. 5 Switching power min./max.
VA
3 / 2 000 (1 mVA / 7 VA)¹⁾
Switching power min./max.
W
3 / 200 (1 mW / 7 W) ¹⁾ (s. limit curve for arc-free operation)
2. 6 Switching capacity
to IEC/EN 60 947-5-1 AC 15 AC V/A
NC: 230 / 1
NO: 230 / 3
DC 13 DC V/A
NC: 24 / 2
NO: 24 / 2
2. 7 Electrical life ²⁾
at 1 s On, 1 s Off (s. contacts service life)
AC 230 V 6 A cos ϕ = 1 switching cycles
> 1 x 10⁵ AgNi 10 > 2 x 10⁵ AgCdO
2. 8 Switching frequency max. switching cycles / s
10
2. 9 Response time / Release time ms
≤ 15 / ≤ 12
2.10 Contact force NO / NC
cN
≥ 10 / ≥ 8
3. 0 Other
3. 1 Mechanical life
switching cycles
3. 2 Temperature range
°C
3. 3 Degree of protection, housing
3. 4 Housing
3. 5 Vibration resistance
3. 6 Climate resistance
3. 8 Insolation according to IEC 60 664-1, EN 50 178
Rated insulation voltage
AC V
Contamination level
Overvoltage category
≥ 50 x 10⁶
- 40 ... + 60 mounted without distance (I_th = 2 x 5 A)
IP40 / IP67 IEC/EN 60 529 wash proof
Thermoplast GF, PA
10 ... 55 Hz; 0,35 mm amplitude; 5 g max. IEC/EN 60 068-2-6
40 / 060 / 04 (climate category); A/B/D IEC/EN 60 068-1
double and reinforced insulation
250
2
III
1) _{Values for AgNi 10-contacts + 5 µm Au}
2) _{10 A total current at t = 20°C and coil voltage UN}
All technical data in this list relate to the state at the moment of edition.
We reserve the right for technical improvements and changes at any time.
3) _{Typical values}
OA/ OW 5669 / 25.02.03 d