|
NM9835 Datasheet, PDF (1/23 Pages) List of Unclassifed Manufacturers – PCI + Dual UART and 1284 Printer Port | |||
|
NetMos
Technology
Nm9835
PCI + Dual UART and 1284 Printer Port
Features
⢠Single 5-V Operation
⢠Low Power
⢠PCI compatible Dual UART
⢠Pin-to-Pin compatible to Nm9735
⢠16 byte transmit-receive FIFO (UART)
⢠Selectable receive trigger levels
⢠Programmable baud rate generator
⢠Modem control signals
⢠5, 6, 7, 8 Bit characters selection
⢠Even, Odd, No parity, or Force parity generations
⢠Status report capability
⢠Compatible with 16C550
⢠Multi-mode compatible controller (SPP, PS2, EPP,
ECP)
⢠Fast data rates up to 1.5 Mbytes/s (parallel port)
⢠Fast data rates up to 1 Mbytes/s (serial ports)
⢠On chip oscillator
⢠Re-map function for legacy ports
⢠16 Byte FIFO (parallel)
⢠Microsoft Compatible
⢠Software programmable mode selects
⢠128-pin VQFP package
Applications
⢠Printer server
⢠Portable backup units
⢠Printer interface
⢠Embedded applications
⢠High speed modems
⢠Monitoring equipment
⢠Add on I/O cards
⢠Serial networking
General Description
Ordering Information
The Nm9835 is a PCI based dual-channel high perfor-
mance UART with Enhanced bi-directional parallel con-
troller. The Nm9835 offers 16 byte transmit and receive
FIFO for each UART channel and 16 byte FIFO for
printer channel. The Nm9835 perform serial-to-parallel
conversions on data received from a peripheral device,
and parallel-to-serial conversion on data received from
its CPU. In addition Nm9835 fully supports the existing
Centronics printer interface as well as PS/2, EPP, and
ECP modes.
Commercial Grade
Nm9835CV 128-VQFP 0° C to +70° C
Industrial Grade
Nm9835EV 128-VQFP -40° C to +85° C
The Nm9835 is ideally suited for PC applications, such
as high speed COM ports and parallel port. The Nm9835
is available in 128-Pin QFP package, It is fabricated in
an advanced in submicron CMOS process to achieve
low drain power and high speed requirements.
Rev. 1.0
Page 1-51
|
▷ |