English
Language : 

NA0108B Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – High Performance Transceiver for the 2.45 GHz ISM Band
nanoNET TRX
High Performance Transceiver
for the 2.45 GHz ISM Band
Overview
The nanoNET TRX transceiver is a highly integrated
mixed signal chip utilizing the unique wireless
communication technology CSS (Chirp Spread Spectrum)
developed by Nanotron Technologies. nanoNET TRX
allows a high range of up to 900 meters in free space and
60 meters indoors in the 2.45 GHz ISM band (@ 1 Mbps).
The system is extremely robust against disturbances such
as noise and multipath fading.
Due to its primarily analog signal processing and the
robustness of the chirp signal, nanoNET TRX has an
extremely low power consumption per successfully
transmitted bit. For battery-powered applications requiring
a long life and high data rates, this IC offers the ideal
solution. The data rate is selectable between 500 kbps,
1 Mbps, and 2 Mbps. Due to the unique chirp pulse,
adjustment of the antenna is not critical, which
significantly simplifies the installation and maintenance of
the system (“pick and place”).
The nanoNET TRX transceiver includes a MAC controller
with CSMA/CA and TDMA support, as well as Forward
Error Correction (FEC), and 128 bit encryption.
Driver software, a Portable Protocol Stack (PPS), an
Evaluation Kit, and a Development Kit are also available.
Main Features
 Operating worldwide in the 2.45 GHz ISM band
 Data rates: 2 Mbps and 1 Mbps
 Range: max 900 m free space, 60 m indoors
(@ 8 dBm TX power, 1 Mbps)
 CSMA/CA and TDMA Support
 Modulation technique: Chirp Spread Spectrum
 Chirp bandwidth: 64 MHz effective
 Processing gain: 17 dB
 Carrier to Interference ratio: -3 dB to 0 dB
(@ BER=10-3, C=-82 dBm, 1Mbps)
 Maximum RF output power: 8 dBm
 TX power adjustment in 19 steps from -27 dBm
to 8 dBm
 Receiver sensitivity: -92 dBm
(@ BER=10-3, 1Mbps)
 Supply voltage: 2.4 V to 3.6 V
 Current consumption: 35 mA (RX), 78 mA
(TX, 8 dBm), 64 m (TX, 0 dBm)
 Standby current with active RTC is 1.5 µA
 Operating temperature range: -40° C to +85° C
 Integrated MAC controller with FEC and CRC
 SPI interface to external µc (up to 16 MHz SPI clock)
 4 channel digital I/O
 Automatic address matching (48 bit)
© Nanotron Technologies GmbH | All rights reserved
Subject to change without notice.
NA-05-S-0007-E-2.00