MTL6400U Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – SINGLE CHANNEL OPTOCOUPLER

MTL6400U
SINGLE CHANNEL OPTOCOUPLER
(Electrically similar to 6N140)
Features:
• High Reliability
• High Current Ration: 300% Typical
• Rugged surface mount package
• Low Input current requirement: 0.5mA
• +1.5kV electrical isolation
Applications:
• Military and Space
• Level shifting
• Line receiver
• Switching power supplies
• Communication Systems
DESCRIPTION
The MTL6400U contains a gallium aluminum arsenide LED optically coupled to a silicon photodarlington detector. The
optocoupler is built in a 6-pin leadless chip carrier. This optocoupler is capable of transmitting signals between two galvanic
sources. The potential difference between transmitter and receiver should not go over the maximum isolation voltage. Also
available screened to MIL-STD-883.
ABSOLUTE MAXIMUM RATINGS
Input Diode
Peak Forward Input Current (Value applies for tw < 1ms, 500 pps) ..............................................................................................................20mA
Average Input Current, I_F (Note 1)……………………………………………...….…………………………………………..10mA
Reverse Input Voltage, V_R………………………………………………………………………………………………………….5V
Output Photodetector
Output Current, I_O…………………………………………………………………………………………………………….….40mA
Output Voltage, V_O……………………………………………………………………………………………..………..-0.5V to 18V
Supply Voltage, V_CC……………………………………………………………………………………….…………….-0.5V to 20V
Output Power Dissipation (Note 2)…………………………………………………………………………………...……….75mW
Storage Temperature.................................................................................................................................................................................. -65°C to +150°C
Operating Free-Air Temperature Range.................................................................................................................................................-55°C to +125°C
Lead Solder Temperature (vapor phase reflow for 30 sec.) ............................................................................................................................215°C
Notes:
1. Derate IF at 0.66mA/°C above 110°C
2. Output power is collector output power plus one half of the total supply power. Derate at 5mW/°C above 110°C.
PARAMETER
RECOMMENDED OPERATING CONDITIONS:
SYMBOL
MIN
MAX
UNITS
Input Current, Low Level
Input Current, High Level
Supply Voltage
IFL
0
1
µA
IFH
0.5
5
mA
VCE
5
18
V
Operating Temperature
PART NUMBER
TA
-55
125
°C
SELECTION GUIDE
PART DESCRIPTION
MTL64X0U.001.X
Single Channel optocoupler, commercial (0° to+70°C operating temperature range)
MTL64XOU.002.X
Single Channel optocoupler, commercial (-40° to +85°C operating temperature range)
MTL64X0U.003.X
Single Channel optocoupler, commercial (-55° to +125 operating temperature range)
MTL64X0U.004.X
Single Channel optocoupler, w/100% device screening -55° to +125°Coperating temperature range)
NOTE: Replace first X with 0 or 2 to indicate type of part required.
X at end of part number represents lead finish. Replace with A for gold or S for solder.
MINCO TECNHOLOGY LABS, INC. ♦ 1805 Rutherford Lane, Austin, TX 78754 ♦ TEL: [phone] ♦ FAX: [phone]