MTL011 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – SXGA Smart Panel Controller

MYSON-CENTURY
TECHNOLOGY
MTL011
(Preliminary)
SXGA Smart Panel Controller
FEATURES
General
Auto configuration of sampling clock frequency, phase, H/V center, as well as white balance.
Auto detection of present or non-present or over range sync signals and their polarities.
Composite sync separation and odd/even field detection of interlaced video.
No external memory required.
On-chip output PLL provide clock frequency fine-tune (inverse, duty cycle and delay).
Serial 2-wire I²C host interface.
Embedded timing controller.
Embedded power regulator.
Embedded power on reset circuit.
3.3V supplier in 144-pin LQFP or 160-pin PQFP package.
Input Processor
Single RGB (24-bit) input rates up to 135MHz.
Support both non-interlaced and interlaced RGB graphic input signals.
YUV 4:2:2 or YUV 4:1:1 (CCIR601/CCIR656) interlaced video input.
Glue-less connection to Philips SAA711x digital video decoder.
Built-in YUV to RGB color space converter.
Compliant with digital LVDS/PanelLink TMDS input interface.
PC input resolution up to SXGA 1280x1024 @ 75Hz.
Video Processor
Independent programmable Horizontal and Vertical scaling up ratios from 1 to 32
Flexible de-interlacing unit for digital YUV video input data.
Zoom to full screen resolution of de-interlaced YUV video data stream.
Built-in programmable gain control for white balance alignments.
Built-in programmable 10-bit gamma correction table.
Built-in programmable temporal color dithering.
Built-in programmable interpolation look-up table.
Built-in programmable sharpening & smoothing filters for edge enhancement.
Support smooth panning under viewing window change.
Output Processor
Dual pixel (36/48-bit) per clock digital RGB output.
Built-in output timing generator with programmable clock and H/V sync.
Support VGA/SVGA/XGA/SXGA display resolution.
Overlay input interface with external OSD controller.
Double scan capability for interlaced input.
GENERAL DESCRIPTION
The MTL011 Smart Panel or Smart Integration Display Controller is a low-cost input format converter for
TFT-LCD Monitor or LCD TV application which accepts 15-pin D-sub RGB graphic signals (through ADC),
YUV signals from digital video decoder or digital RGB graphic signals from PanelLink TMDS receiver. It
includes a RGB/YUV input processor, video scaling up processor, OSD input interface and output display
processor in 144-pin LQFP or 160-pin PQFP package.
This datasheet contains new product information. Myson Technology reserves the rights to modify the product specification without
notice. No liability is assumed as a result of the use of this product. No rights under any patent accompany the sale of the product.
Revision 0.9
-1-
March 2002