MSK162 Datasheet, PDF (1/5 Pages) List of Unclassifed Manufacturers – ULTRA HIGH VOLTAGE OPERATIONAL AMPLIFIER

ISO-9001 CERTIFIED BY DSCC
162/163 ^{ULTRA HIGH VOLTAGE}
OPERATIONAL AMPLIFIER
M.S.KENNEDY CORP.
4707 Dey Road Liverpool, N.Y. 13088
[phone]
FEATURES:
MIL-PRF-38534 QUALIFIED
Monolithic MOS Technology
Low Cost
High Voltage Operation : 350V
Low Quiescent Current : 2mA Max.
High Output Current : 60mA Min.
No Second Breakdown
High Speed : 20V/µS Typ.
Internally Compensated For Gains >10 V/V
MSK162
MSK163
DESCRIPTION:
The MSK 162 is an ultra high voltage monolithic MOSFET operational amplifier ideally suited for electrostatic transducer and
electrostatic deflection applications. With a total supply voltage rating of 350 volts and 60mA of available output current, the MSK
162 is also an excellent low cost choice for high voltage piezo drive circuits. The MOSFET output frees the MSK 162 from
secondary breakdown limitations and power dissipation is kept to a minimum with a quiescent current rating of only 2mA. The
MSK 162 is packaged in a hermetically sealed 8 pin power dip and is internally compensated for closed loop gains of 10 V/V or
greater. For applications requiring heat sinking, the MSK 163 is available with bolt down tabs and is otherwise identical to the MSK
162 (see mechanical specifications). If the application calls for a gain of less than 10 V/V, refer to the MSK 158/159 data sheet.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
Piezo Electric Positioning
Electrostatic Deflection
Computer to Vacuum Tube Interface
Ultra High Voltage Op-Amp Applications
PIN-OUT INFORMATION
1 -Vcc
2 N/C
3 Output Drive
4 Current Sense
1
8 Inverting Input
7 Non-Inverting Input
6 N/C
5 +Vcc
Rev. B 7/00