MSK1461 Datasheet, PDF (1/5 Pages) M.S. Kennedy Corporation – HIGH SPEED/VOLTAGE OP AMP

ISO 9001 CERTIFIED BY DSCC
HIGH SPEED/VOLTAGE
M.S.KENNEDY CORP.
OP AMP
4707 Dey Road Liverpool, N.Y. 13088
1461
[phone]
FEATURES:
Extremely Fast - 500v/µS
Wide Supply Range ±15V to ±45V
VMOS Output, No S.O.A. Restrictions
Large Gain-Bandwidth Product
FET Input
Electrically Isolated Case
800mA Typical Output Current
MIL-PRF-38534 CERTIFIED
DESCRIPTION:
The MSK 1461 is a state of the art high speed FET input operational amplifier. The distinguishing characteristic
of the MSK 1461 is its unique VMOS output stage which completely eliminates the safe operating area restrictions
associated with secondary breakdown of bipolar transistor output stage op-amps. Freedom from secondary break-
down allows the 1461 to handle large output currents at any voltage level limited only by transistor junction tempera-
ture. 115 dB of open loop gain gives the 1461 high closed loop gain accuracy and the typical ±1.0mV of input offset
voltage will fit well in any error budget. A 500 V/µS slew rate and 1200 MHz gain bandwidth product make the 1461
an outstanding high-speed op-amp. A single external capacitor is used for compensation and output current limiting
is user programmable through the selection of two external resistors.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
Video Yoke Drivers
Video Distribution Amplifiers
High Accuracy Audio Amplification
High Speed ATE Pin Drivers
PIN-OUT INFORMATION
1 Inverting Input
2 Non-Inverting Input
3 No Connection
4 No Connection
5 Negative Power Supply
6 Negative Current Limit
7 No Connection
1
8 Output
9 Positive Current Limit
10 Positive Power Supply
11 Compensation
12 Compensation
13 Offset Adjust
14 Offset Adjust
Rev. B 8/00