MOS6020 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – SMT Power Inductor

Document 287 -1
SMT Power Inductor - MOS6020 Series
Measuring a mere 2 mm high, the MOS6020 family of
surface mount power inductors offers exceptionally low
DC resistance and excellent current handling.
These magnetically shielded inductors are extremely
space-efficient, with a 6 × 7.1 mm footprint. They are
available in inductance values from 2.2 µH to 470 µH
with saturation current ratings up to 2.15 Amps. Custom
versions up to 4.7 mH are also available.
Free evaluation samples are available by contacting
Coilcraft or ordering them on-line at www.coilcraft.com.
L ±20%² DCR max SRF typ^{3 2} Isat^{4 4}Irms⁵
Part number¹
(µH) (Ohms) (MHz) (A) (A)
MOS6020-222MX_ 2.2
MOS6020-332MX_ 3.3
MOS6020-472MX_ 4.7
MOS6020-682MX_ 6.8
MOS6020-103MX_ 10
0.035
0.046
0.050
0.078
0.092
110 2.15 4.1
85 1.80 3.6
60 1.50 3.1
55 1.28 2.7
36 1.00 2.2
MOS6020-153MX_ 15
MOS6020-223MX_ 22
MOS6020-333MX_ 33
MOS6020-473MX_ 47
MOS6020-683MX_ 68
0.130
0.182
0.290
0.420
0.520
30 0.85 1.8
22 0.72 1.4
20 0.58 1.1
16 0.49 0.7
15 0.40 0.63
MOS6020-104MX_ 100
MOS6020-154MX_ 150
MOS6020-224MX_ 220
MOS6020-334MX_ 330
MOS6020-474MX_ 470
0.800
1.28
2.00
2.84
4.40
13 0.33 0.56
10 0.27 0.49
8 0.22 0.42
7 0.18 0.35
5 0.15 0.29
1. When ordering, please specify packaging code:
MOS6020-104MXC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (500 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/
HP 4284A or equivalent.
3. SRF measured using Agilent/HP 8753D network analyzer.
4. DC current at which the inductance drops 30% (typ) from its value
without current.
5. Average current for 40°C temperature rise from 25°C ambient.
6. Operating temperature range -40°C to +85°C.
7. Electrical specifications at 25°C.
See Qualification Standards section for environmental and test data.
Specifications subject to change without notice. Document 287-1 Revised 07/30/04