MKS3 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Metallized polyester capacitors in PCM 7.5 mm

Metallized polyester capacitors
in PCM 7.5 mm
1000 pF to 2.2 µF in PCM 7.5 mm. For general applications. Alternative to PCM 5
mm with possibility to be placed across wiring path. Available taped and reeled.
Technical Data
Dissipation factors at +20° C: tan delta
Dielectric: Polyethylene terephthalate film.
Capacitor electrodes: Vacuum-deposited aluminium.
Encapsulation: Flame retardent plastic case,
UL 94 V-0, with epoxy resin seal.
Colour: Red. Marking: Black.
Temperature range: -55° C to +100° C.
Test specifications: In accordance with IEC 60384-2 and EN
130400 (u. prep.).
Test category: 55/100/21 in accordance with IEC.
Insulation resistance at +20° C:
Ur
Utest C <= 0.33 µF
0.33µF<C<=2.2µF
50 VDC 10 V
-
>= 1500 sec.
(MOhms x µF)
Mean value:
4500 sec.
63 VDC
50 V
>= 1x104 MOhms
Mean value:
5x104 MOhms
>= 3000 sec.
(MOhms x µF)
Mean value:
6000 sec.
>= 1.5x104 MOhms
>=100VDC 100V Mean value:
1x105 MOhms
>= 5000 sec.
(MOhms x µF)
Mean value:
10000 sec.
In accordance with IEC 60384-2 and
EN 130400 (u. prep.).
Measuring time: 1 min.
. Capacitance tolerances: +/-20%, +/-10%, +/-5%
at f
1 kHz
10 kHz
100kHz
C<=0.1µF
<=8x10-3
<=15x10-3
<=30x10-3
0.1µF<C<=1.0µF
<=8x10-3
<=15x10-3
-
C>1.0µF
<=10x10-3
-
-
Maximum pulse rise time:
Capacitance
pF/µF
1000...6800
0.01...0.022
0.033...0.068
0.1...0.15
0.22...1.0
1.5...2.2
50VDC
-
-
-
-
8/80
6/60
Pulse rise time V/µsec
max. operation/test
63VDC 100VDC 250VDC 400VDC
-
-
15/150
10/100
8/80
-
-
30/300
15/150
15/150
10/100
-
60/600
30/300
20/200
15/150
12/120
-
60/600
60/600
60/600
-
-
-
630VDC
60/600
60/600
60/600
-
-
-
for pulses equal to the rated voltage.
Test voltage: 1.6 Ur, 2 sec.
Vibration: 6 hours at 10...2000 Hz and 0.75 mm displacement
amplitude or 10 g in accordance
with IEC 60068-2-6.
Low air density: 1 kPa = 10 mbar in accordance
with IEC 60068-2-13.
Bump test: 4000 bumps at 390 m/sec2 in accordance with IEC
60068-2-29.
Voltage derating: A voltage derating factor of 1.25% per K must
be applied from +85° C for DC voltages and from +75° C for AC
voltages.
General Data
Capaci-
tance
W
1000pF
1500 "
2200 "
3300 "
4700 "
6800 "
0.01µF
0.015 "
0.022 "
0.033 "
0.047 "
0.068 "
0.1 µF
0.15 "
0.22 "
0.33 "
0.47 "
0.68 "
50 VDC/
30 VAC*
H L PCM** W
63 VDC/
40 VAC*
H L PCM** W
100 VDC/
63 VAC*
H L PCM** W
250 VDC/
160 VAC*
H L PCM** W
400 VDC/
200 VAC*
H L PCM** W
630 VDC/
220 VAC*
H L PCM**
2.5 7 10 7.5
2.5 7 10 7.5
2.5 7 10 7.5 2.5 7 10 7.5
2.5 7 10 7.5 2.5 7 10 7.5
2.5 7 10 7.5 2.5 7 10 7.5
2.5 7 10 7.5 3 8.5 10 7.5 3 8.5 10 7.5
2.5 7 10 7.5 3 8.5 10 7.5 3 8.5 10 7.5
2.5 7 10 7.5 4 9 10 7.5 4 9 10 7.5
2.5 7 10 7.5 3 8.5 10 7.5 4.5 9.5 10.3 7.5 4.5 9.5 10.3 7.5
2.5 7 10 7.5 3 8.5 10 7.5 5 10.5 10.3 7.5 5 10.5 10.3 7.5
2.5 7 10 7.5 3 8.5 10 7.5 5.7 12.5 10.3 7.5 5.7 12.5 10.3 7.5
2.5 7 10 7.5 3 8.5 10 7.5 4 9 10 7.5
2.5 7 10 7.5 3 8.5 10 7.5 5 10.5 10.3 7.5
2.5 7 10 7.5 3 8.5 10 7.5 5 10.5 10.3 7.5
3 8.5 10 7.5 4 9 10 7.5 5 10.5 10.3 7.5
4 9 10 7.5 4.5 9.5 10.3 7.5 5.7 12.5 10.3 7.5
4.5 9.5 10.3 7.5 5 10.5 10.3 7.5
5 10.5 10.3 7.5 5.7 12.5 10.3 7.5