MIL-M-38510 Datasheet, PDF(1/58 Page) List of Unclassifed Manufacturers – MICROCIRCUITS, DIGITAL, TTL, DATA SELECTORS/MULTIPLEXERS, MONOLITHIC SILICON

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

MIL-M-38510 Datasheet, PDF (1/58 Pages) List of Unclassifed Manufacturers – MICROCIRCUITS, DIGITAL, TTL, DATA SELECTORS/MULTIPLEXERS, MONOLITHIC SILICON

INCH-POUND

MIL-M-38510/14E

21 March 2005__

SUPERSEDING

MIL-M-38510/14D

2 August 1982

MILITARY SPECIFICATION

MICROCIRCUITS, DIGITAL, TTL, DATA SELECTORS/MULTIPLEXERS,

MONOLITHIC SILICON

Inactive for new design after 7 September 1995.

This specification is approved for use by all Depart-

ments and Agencies of the Department of Defense.

The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535

1. SCOPE

1.1 Scope. This specification covers the detail requirements for monolithic, silicon, TTL, data

selectors/multiplexers, logic microcircuits. Two product assurance classes and a choice of case outlines and lead

finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-

38510 have been superseded by MIL-PRF-38535, (see 6.4).

1.2 Part or Identifying Number (PIN). The PIN is in accordance with MIL-PRF-38535, and as specified herein.

1.2.1 Device types. The device types are as follows:

Device type

Circuit

02, 06

Sixteen-input data selector/multiplexer, with enable

Eight-input data selector/multiplexer, with enable

Dual, four-input data selector/multiplexer, with enable

Dual, four-input data selector/multiplexer, without enable

Quad, two-input data selector/multiplexer, with enable

1.2.2 Device class. The device class is the product assurance level as defined in MIL-PRF-38535.

1.2.3 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows:

Outline letter

Descriptive designator

Terminals

Package style

GDIP1-T16 or CDIP2-T16

Dual-in-line

GDFP2-F16 or CDFP3-F16

Flat-pack

GDIP1-T24 or CDIP2-T24

Dual-in-line

GDFP2-F24 or CDFP3-F24

Flat-pack

GDFP7-F24 or CDFP8-F24

Flat-pack

Comments, suggestions, or questions on this document should be addressed to: Commander, Defense

Supply Center Columbus, ATTN: DSCC-VAS, P. O. Box 3990, Columbus, OH 43218-3990, or emailed to

bipolar@dscc.dla.mil. Since contact information can change, you may want to verify the currency of this

address information using the ASSIST Online database at http://assist.daps.dla.mil.

AMSC N/A

FSC 5962

▷