MGDSI-10 Datasheet, PDF (1/9 Pages) List of Unclassifed Manufacturers – 2:1 Standard Input Single & Bi Outputs Metallic case - 1.500 VDC Isolation

Industrial DC/DC CONVERTER
MGDI-10 Standard Input : 10W POWER ^Industrial
Grade
2:1 Standard Input
Single & Bi Outputs
Metallic case - 1.500 VDC Isolation
• _{Low profile : 0,33 “ ( 8.5mm)}
• Nominal power of 10 W without derating
• Wide temperature range : -40°C/+95°C case
• High efficiency up to 83 %
• Soft start
• Galvanic isolation 1.500 VDC
• Integrated LC EMI filter
• Permanent short circuit protection
• No optocoupler for high reliability
1-General
The MGDI-10 series is a full family of DC/DC All the modules are designed with LC network
power modules designed for use in distributed filters to minimize reflected input current ripple
power architecture and are particularly suitable and output voltage ripple according to EN55022
for mobile or ground fixed applications in and FCC Part 15J standard.
transportation, industry and télécommunication The modules include a soft-start, and a perma-
areas. These modules use a high frequency fixed nent short circuit protection to ensure efficient
switching technic at 500 KHz providing excellent module protection. The soft-start allows current
reliability, low noise characteristics, high power limitation and eliminates inrush current during
density and a low profile package. Standard start-up. The short circuit protection completely
models are available with nominal input volta- protects the modules against short-circuits of
ges as 5, 12, or 24 volts in range of 4,5-5,5,
9-18 or 18-36 volts. The series include single
any duration by a shut-down and restores to
normal when the overload is removed.
5
and bi output voltage choices of 3,3, 5, 12, 15, The design has been carried out with surface
+/-5, +/-12 or +/-15 volts.
mount components and is manufactured in a
No external heatsink is required for the MGDI- fully automated process to guarantee high
10 series to supply 10W output power over the quality. Each module is tested and burned in
case temperature range of -40°C up to 95°C. with a GAIA converter automated test equipment.
The MGDI-10 series is designed in conformity
with safety standards EN60950 and UL1950.
2-Product Selection
Single output model : MGDSI-10-
Bi output model
: MGDBI-10-
Input Voltage Range
Permanent
C : 4,5-5,5 VDC
F : 9-18 VDC
I : 18-36 VDC
Output
B : 3.3 VDC
C : 5 VDC or +/-5VDC
E : 12 VDC or +/-12VDC
F : 15 VDC or +/-15VDC
REDEFINING THE SOURCE OF POWER
© Gaia Converter FC97-006.08/05 Revision J
For locations, phone, fax, E-Mail see back cover