MBRF1035CT Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Dual Schottky Rectifiers

MBRF1035CT thru MBRF1060CT
Crownpo Technology
Dual Schottky Rectifiers
Features
N Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
N Dual rectifier construction, positive center tap
N Metal silicon junction, majority carrier conduction
N Low power loss, high efficiency
N Guardring for overvoltage protection
N For use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications
Mechanical Data
0.405 (10.27)
0.383 (9.72)
0.600 (15.5)
0.580 (14.5)
PIN
1
2
3
Reverse Voltage 35 to 60V
Forward Current 10A
ITO-220AB
0.188 (4.77)
0.172 (4.36)
0.110 (2.80)
0.100 (2.54)
0.140 (3.56)
0.130 (3.30) ^DIA.
0.131 (3.39)
DIA.
0.122 (3.08)
0.676 (17.2)
0.646 (16.4)
0.350 (8.89)
0.330 (8.38)
Case: JEDEC ITO-220AB molded plastic body
Terminals: Plated leads, solderable per
MIL-STD-750, Method 2026
High temperature soldering guaranteed:
250-C/10 seconds, 0.25" (6.35mm) from case
0.560 (14.22)
0.530 (13.46)
0.191 (4.85)
0.171 (4.35)
0.060 (1.52)
PIN 1
PIN 2
0.110 (2.80)
0.100 (2.54)
Polarity: As marked
PIN 3
Mounting Position: Any
Mounting Torque: 10 in-lbs maximum
Weight: 0.08 oz., 2.24 g
0.105 (2.67)
0.095 (2.41)
0.037 (0.94)
0.027 (0.69)
0.205 (5.20)
0.195 (4.95)
0.022 (0.55)
0.014 (0.36)
Dimensions in
inches and (millimeters)
Maximum Ratings and Thermal Characteristics (TC = 25-C unless otherwise noted)
Parameter
MBRF MBRF MBRF MBRF MBRF
Symbol _{1035CT 1040CT} 1045CT 1050CT 1060CT Unit
Maximum repetitive peak reverse voltage
VRRM
35
40
45
50
60
V
Working peak reverse voltage
VRWM
35
40
45
50
60
V
Maximum DC blocking voltage
VDC
35
40
45
50
60
V
Maximum average forward rectified current Total device
at TC = 105-C
Per leg
IF(AV)
10
5
A
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method) per leg
IFSM
150
A
Peak repetitive reverse current per leg at tp = 2es, 1KHZ IRRM
1.0
0.5
A
Voltage rate of change (rated VR)
dv/dt
10,000
V/e s
Typical thermal resistance per leg
Operating junction and storage temperature range
RθJC
TJ, TSTG
5.0
s65 to +150
-C/W
-C
RMS Isolation voltage (MBRF type only) from terminals
to heatsink with t = 1 second, RH m 30%
VISOL
4500 ⁽¹⁾
3500 ⁽²⁾
V
1500 ⁽³⁾
Electrical Characteristics (TC = 25-C unless otherwise noted)
Maximum instantaneous at IF = 5.0A, TC = 125-C
forward voltage per leg⁽⁴⁾ at IF = 5.0A, TC = 25-C
VF
0.55
0.70
V
Maximum reverse current per leg
at working peak reverse voltage⁽⁴⁾
TJ = 25-C
TJ = 100-C
IR
0.1
6.0
mA
Notes: (1) Clip mounting (on case), where lead does not overlap heatsink with 0.110" offset
(2) Clip mounting (on case), where leads do overlap heatsink
(3) Screw mounting with 4-40 screw, where washer diameter is m 4.9 mm (0.19")
(4) Pulse test: 300e s pulse width, 1% duty cycle
01-Mar-04
Document No. 11048
www.crownpo.com