M9410 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – MODULAR IN-GRADE LUMINAIRE SINGLE LENS

SUITABLE FOR WET LOCATIONS
M9410/M9430SERIES ^TYPE
JOB NAME
MODULAR IN-GRADE LUMINAIRE ^{PART NUMBER}
SINGLE LENS
DESCRIPTION
Hydrel’s M9410/M9430 Series modular in-grade lights are multi-purpose units
designed for uplighting architectural and landscape features. These units
can be flush mounted into a variety of substrates or landscape materials.
The M9410/M9430 consists of a factory-sealed, thermally protected lamp
module and encapsulated power module. The components are secured
inside a heavy-duty polymer rough-in housing designed with channeled
convective cooling, an integral junction box, and finish door trim assembly.
ModelMaterial Lamp Type Voltage Distribution Lens Conduit EntriesAccessories Options LampFinishList
FEATURES & SPECIFICATIONS
DOOR MATERIAL: Cast Aluminum, cast bronze, cast aluminum or
bronze with stainless perforated trim insert or Stainless Steel. Available in
round or square door trim.
Bronze or Aluminum Round Stainless Steel Round
ROUGH-IN SECTION: Injection molded polymer with integral junction
box for thru- branch wiring. The housing is U.V. stabilized, impact and
corrosion resistant for use in all types of environments. The rough-in has
a cylinder or side-car configuration and houses the lamp and power
module components and top door finishing section.
9” DIA.
(229)
10” DIA.
(254)
LAMP MODULE: Stainless steel housing, factory-sealed and purged of all
moisture for longer component life. Lens is sealed with silicone gasket and
stainless steel clamp band assembly with single fastener. Electrical connec-
tion to lamp module is done through a submersible quick pull plug connector
with gold-plated contacts. Unit is thermally protected. LAMP INCLUDED.
LAMP TYPE: Low Voltage: MR-16 bi-pin base, 75 Watt max.,
PAR-36 screw terminal base, 75 Watt max.
Incandescent: T-4 quartz halogen mini-can or B15d base,
100 Watt max.
Fluorescent: Triple tube CFL 4-pin base, 32 Watt max.
HID: T-4 or T-6 bi-pin base, 70 Watt max.,PAR-20 or
PAR-30 medium or E27 base, 70 Watt max.
Color Corrected Metal Halide
If a specific lamp is desired, specify manufacturer’s lamp number, most lamps
can be supplied. LAMP INCLUDED.
9” Bronze or Aluminum Square
10” Stainless Steel Square
9” SQ.
(229)
10” SQ.
(254)
VOLTAGE: See ordering guide.
LIGHT DISTRIBUTION: See ordering guide.
FINISHING SECTION: Single lens design includes door assembly with
360° Aim-Lock™ lamp module support ring. Module indexing provides
easy maintenance and relamping without re-aiming. Active optical lenses
are also available. Door trim locks into position with two stainless steel
captive, tamper-resistant fasteners.
POWER MODULE: Ballast /Transformer is encapsulated in a custom
designed heat-dissipating epoxy resin that also eliminates all moisture
intrusion to the ballast. Module is provided with submersible rated cord
leads for connection to integral junction box and lamp module. Standard
ballast is high power factor, low starting temperature; fluorescent elec-
tronic or HID magnetic. HID electronic ballast also available.
CONDUIT ENTRIES: Two (2) bottom or side entries available. Box suit-
able for thru-branch wiring. Splicing volume is 25 in³ (410 ccm).
NOTE: Potting compound (PC21) recommended for junction box splices.
PC21 sold separately.
ACCESSORIES: See ordering guide.
9"
(229)
16"
(406)
14 3/8"
(365)
Incandescent & Fluorescent
Rough-In Housing
9"
(230)
19 3/8"
(494)
10 3/8"
(265)
6"
(155)
6"
(155)
7 5/8"
(196)
2" (54)
HID
Rough-In Housing
FINISH: Finish is natural aluminum or bronze. Stainless steel door is
brushed finish. Aluminum doors may be painted. See ordering guide for
color options.
LISTING: U.L., CE
Hydrel is an ISO 9001
Certified Manufacturer
©2005 Hydrel
11/15/05
M9410_M9430
APPROVALS
12881 Bradley Ave
Sylmar, CA 91342
Phone: [phone]
Fax: [phone]
www.hydrel.com