M8THC Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – LOAD INSENSITIVE MIXER

M8TH/M8THC
LOAD INSENSITIVE MIXER
· LO 1 TO 3400 MHz
· RF 1 TO 3400 MHz
· IF 1 TO 2000 MHz
· LO DRIVE: +23 dBm (NOMINAL)
· INSENSITIVE TO SYSTEM MISMATCH
· HIGH INTERCEPT: +29 dBm (TYP.)
Specifications (Rev. Date: 7/02)*
Characteristics
SSB Conversion Loss & SSB Noise Figure (max.)
fR = 0.005 to 2 GHz, fL = 0.005 to 2 GHz, fI = 0.001 to 0.5 GHz
fR = 0.001 to 3.4 GHz,fL = 0.001 to 3.4 GHz,fI = 0.001 to 2 GHz
fR =
fL =
fI =
fR =
fL =
fI =
Isolation (min.)
L to R
fL = 0.01 to 1.5 GHz
fL = 0.01 to 3.4 GHz
fL =
L to I
fL = 0.01 to 1.5 GHz
fL = 0.01 to 3.4 GHz
fL =
R to I
fR = 0.01 to 3.4 GHz
fR =
1 dB Conversion Compression
fL @ +23 dBm
fL @
Input IP3
fR1 = 1 GHz @ 0 dBm
fR2 = 1.01 GHz @ 0 dBm
fL = 1.8 GHz @ 22 dBm
Typical
6.5 dB
8.5 dB
Guaranteed
+25°C
-54° to +85°C
8.0 dB
10.5 dB
8.3 dB
10.8 dB
37 dB
35 dB
40 dB
35 dB
21 dB
+17 dBm
+29 dBm
30 dB
22 dB
30 dB
25 dB
29 dB
21 dB
29 dB
24 dB
fR1 =
fL =
fR2 =
fR1 =
fL =
fR2 =
* Guaranteed conversion loss values for M8THC unit are 0.5 dB worse than values listed and guaranteed over 0°C to 50°C temperature range only. Measured in
a 50-ohm system with nominal LO drive and downconverter application only, unless otherwise specified. Subject to change without notice.
Absolute Maximum Ratings
Operating Temperature
-54°C to 100°C
Storage Temperature
-65°C to 100°C
Peak Input Power
27 dBm max. @ +25°, 23 dBm max. @ +100°C
Peak Input Current
Outline Drawing(s)
Package
Figure
TO-8
BO
SMA
CH
Model
M8TH
M8THC
Specifications subject to change without notice. • North America: 1-800-366-2266
Visit www.macom.com for complete contact and product information.