M34S75C4F1 Datasheet, PDF (1/7 Pages) List of Unclassifed Manufacturers – Compact Automotive Connectors for PCB-to-Cable Applications

COMPONENTS PRODUCT INFORMATION
NEW
Compact Automotive Connectors for PCB-to-Cable Applications ^CONNECTOR
MX34 Series (for Low Pin Counts)
MB-0175-1
October 2007
RoHS　Compliant
Compact, single row type connectors have been developed to add to the existing line
of MX34 Series connectors for automobiles.
The available pin counts are 3, 5 and 7 positions, available in straight and angle pin
header type. (Straight type is available in 5 and 7 positions)
Hook pins are placed on both sides for easier board attachment. An 8 position,
double row type has also been developed.
Features
•Compact, single row PCB-to-cable connector with 2.2 mm horizontal pitch.
(8 pos. is available in double row, 2.4mm pitch)
•Hook pins are placed on both sides for easier board attachment.
•Socket contact with box-type pin header is durable in external forces; contact is
highly resistant to twisting and equipped with a proven double leaf spring.
(In common with MX34 Series double row type)
• Adoption of a preset-type retainer facilitates easy wire harness operation.
If retainer is not completely inserted in housing, the connector is not engaged,
and incomplete contact insertion is detected.
•Lock spring is equipped with a bridge protecting the contacts from external load.
General Specifications
•No. of contacts: Single row 3, 5, 7 pos. _{•Rated current: 3A}
Double row 8 pos.
•Contact resistance:
•Insulation resistance: 100M ohm min
5m ohm max. (initial) ^{•Durability: 50 times}
•Dielectric withstanding voltage:
•Applicable wire:
AC 1000V (per minute)
•Operating temperature:
Please refer to next page
-40 Deg. C to +85 Deg. C
1/6
JAE PMK Div. Proprietary. Copyright © 2007，Japan Aviation Electronics Industry, Ltd.