LL4001G Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 1.0 AMP Surface Mount Glass Passivated Silicon Rectifiers

LL4001G THRU LL4007G
Features
1.0 AMP Surface Mount Glass Passivated Silicon Rectifiers
Voltage Range
50 to 1000 Volts
Current
1.0 Ampere
MELF
a Plastic package has carries underwriters
Laboratory flammability classification 94V-0
a Surge overload rating to 30 Ampers peak
a Ideal for printed circuit board.
a Reliable low cost construction utilizing
molded plastic technique results in in-
expensive product.
a High temperature soldering guaranteed:
250°C / 10 seconds at terminals.
Mechanical Data
a Solderability per MIL-STD-750, method 208
at terminals.
a Mounting position: Any
a Weight: 0.12 gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
LL LL LL LL LL LL LL Units
4001G 4002G 4003G 4004G 4005G 4006G 4007G
Maximum Recurrent Peak Reverse Voltage _{50 100 200 400 600 800 1000 V}
Maximum RMS Voltage
35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
@TA = 75°C
1.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load
30
A
(JEDEC method )
Maximum Instantaneous Forward Voltage
@1.0A
1.1
V
Maximum DC Reverse Current @ TA=25°C
at Rated DC Blocking Voltage @ TA=125°C
5
uA
100
uA
Typical Junction Capacitance ( Note 1 )
15
pF
Typical Thermal Resistance RÛJC (Note 2)
50
°C/W
Operating and Storage Temperature Range
- 65 to + 150
°C
TJ,TSTG
Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C.
Notes: 2. Thermal Resistance from Junction to Ambient.
- 374 -