LEDRS25N Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – LED Highly-Diffused Light (25 mm)

LED Highly-Diffused Light (25 mm)
Features
• Designed to minimize surface textures and elevation changes, while providing
uniform illumination over the field of view
• 25 mm x 25 mm light aperture
• Provides uniform lighting for specular surfaces
• Black anodized aluminum housing
• The suggested field of view is 12 mm x 12 mm and the suggested stand off is 25 mm
LED Highly-Diffused Light Model
Models
Illumination
Type
Color
LEDRS25N^†
Continuous
highly-diffused
light
Red 640 nm
† _{This model is not stocked and is non-returnable.}
Cable
0.5 m (18")
terminated
with 9-pin
D-sub
connector
(male pins)
Supply
Voltage
Supply
Current
12V dc ±10%
with voltage
420 mA max.
regulation of ±1%
Connections
Pin 3 = dc common
Pin 4 = +V
Power supply model
PSA-12(E) or
PS2V-12(E)
is recommended
(see other side)
Useful Life
Environmental Rating
Operating Conditions
60,000 hours
IEC IP20; NEMA 1
Temperature: 0° to 40°C (+32° to 104°F)
Maximum relative humidity: 95% at 40°C (non-condensing)
0.5 m
(18")
22.3 mm
(0.88")
25 mm ^{40.1 mm}
(0.98") ^(1.58")
Light Aperture
25 mm
(0.98")
Light Aperture
61.3 mm
(2.41")
M6 x 1.0 Thru (2x)
25.4 mm
(1.00")
115.3 mm
(4.54")
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace, free of
charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover
damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied.
Printed in USA
05/01
P/N 67441