English
Language : 

L1085 Datasheet, PDF (1/7 Pages) List of Unclassifed Manufacturers – 3A Adjustable Low Dropout Linear Regulator (LDO)
NIKO-SEM
3A Adjustable Low Dropout
Linear Regulator (LDO)
L1085
TO-252,263,220
GENERAL DESCRIPTION
The L1085 is a positive and low dropout
three-terminal voltage regulator with 3A out-
put current capability. This device is design-
ed for use in low voltage applications that
offers lower dropout voltage and faster tran-
sient response.
This device is fully protected against over
current faults, over temperature operation,
reversed input polarity, reversed lead insert-
ion, transient voltage spike …etc.
On-Chips trimming the reference voltage to
1% and features the low dropout of maxi-
mum 1.45 volts.
The L1085 Series regulators are available
in the popular industry standard TO-220
TO-263 and TO-252 packages.
FEATURES
z Very easy to use, it requires only two
external resistors to set the output voltage
z Low dropout voltage:
1.3V typical at up to 3A
z Low ground current
z Fast transient response
z Current & thermal limiting
z Line regulation: 0.5% typical
z Load regulation: 0.5% typical
z TO-220, TO-263 and TO-252 packages
APPLICATIONS
z High current microprocessor supplies
z Low voltage logic supply
z Powering VGA & sound card
z Portable instrumentation
z Constant current regulator
z Post regulator for switching power supply
TYPICAL APPLICATION
Vin
Cin
+
10uF
L1085
IN
OUT
ADJ
Vref
Iadj
Vout
R1
Cout
+
10uF
R2
Vo = Vref (1+R2/R1) + Iadj x R2
1. Cin needed if device is far from from filter capacitors.
2. Cout required for stability.
- Basic Adjustable Regulator Circuit -
1
MAY-31-2001