KC7783R Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – PIR Module Low Cost version

RoHS
Compliant
KC7783R
PIR Module
Low Cost version
This is a low cost version of the PIR module. It is designed for cost sensitive consumer product.
Except the IC package format, all the mechanical and electrical spec is same as KC7783.
Features:
… IC soft package by dice bonding technique
… Small size: 25 x 35mm
… Ball lens is included as standard configuration
… 3 leads flat cable for easy connection
… 4 mounting holes on board
… High Sensitivity
… High immunity to RFI
… Power up delay to prevent from false triggering
… Output High for direct connect to control panel
Specification
Min Typ Max Unit
Operation Voltage
4.7
5
12
V
Standby Current ( no load)
300
µA
Output Pulse Width
0.5
Sec
Output High Voltage
5
V
Detection Range
Operation Temperature
5
M
-20
25
50
o_C
Humidity Range
95
%
Note: 1. All other features and specification, please refer to KC778B
2. Minimum output pulse width can be customer specified.
Standard Configuration
PIR controller
KC778B in dice form
PIR Sensor
Lens
RE200B by NICERA
Ball lens of 60^o detection angle
Connector
3 leads flat cable, Power, GND, O/P
Mechanical Dimension
Lens Dimension
(unit in mm)
24
24
R12
3.7
19.5
25
Vertical View Pattern
O/P
V+
GND
20^o
30^o
60^o
2M
30
70
35
1
2
3
4
5 (M)
Application Note:
1. The PIR sensor is sensitive to the temperature change and therefore to prevent from operating the module in rapid environmental
temperature changes, strong shock or vibration. Don't expose to the direct sun light or headlights of automobile. Don't expose to
direct wind from heater or air conditioner.
2. This module is designed for indoor use. If using in outdoor, make sure to apply suitable supplemental optical filter and drop-proof,
anti-dew construction
3. Detection range might be varied in different environmental temperature condition.