KBU1001G Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Single Phase 10 AMPS. Glass Passivated Bridge Rectifiers

KBU1001G THRU KBU1007G
Single Phase 10 AMPS. Glass Passivated Bridge Rectifiers
Voltage Range
50 to 1000 Volts
Current
10.0 Amperes
KBU
Features
a UL Recognized File # E-96005
a Glass passivated junction
a Ideal for printed circuit board
a Reliable low cost construction
a Plastic material has Underwriters
Laboratory Flammability Classification
94V-0
a Surge overload rating to 200 amperes
peak
a High temperature soldering guaranteed:
250^oC / 10 seconds / .375”, (9.5mm) lead
lengths at 5 lbs., (2.3kg) tension
a Weight: 0. 3 ounce, 8.0 grams
a Mounting torque: 5 in. lb. Max.
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25+ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
KBU KBU KBU KBU KBU KBU KBU Units
1001G 1002G 1003G 1004G 1005G 1006G 1007G
Maximum Recurrent Peak Reverse Voltage
50 100 200 400 600 800 1000 V
Maximum RMS Voltage
35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
@TA =45+
10.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load
200
A
(JEDEC method )
Maximum Instantaneous Forward Voltage
@ 10.0A
Maximum DC Reverse Current @ TA=25+
at Rated DC Blocking Voltage @ TA=125+
1.1
V
5.0
uA
500
uA
Typical Thermal Resistance (Note) RθJC
2.2
+/W
Operating Temperature Range TJ
-55 to +150
+
Storage Temperature Range TSTG
-55 to + 150
+
Note: Thermal Resistance from Junction to Case with Device Mounted on 100mm x 100mm x 1.6mm
Cu Plate Heatsink.
- 518 -