KBP301G Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Single Phase 3.0 AMPS. Glass Passivated Bridge Rectifiers

Features
KBP301G THRU KBP307G
Single Phase 3.0 AMPS. Glass Passivated Bridge Rectifiers
Voltage Range
50 to 1000 Volts
Current
3.0 Amperes
KBP
a UL Recognized File # E-96005
a Ideal for printed circuit board
a Reliable low cost construction technique
results in inexpensive product
a High temperature soldering guaranteed:
250°C / 10 seconds at 5 lbs. ( 2.3 Kg )
tension
a Small size, simple installation
Leads solderable per MIL-STD-202,
Method 208
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
KBP KBP KBP KBP KBP KBP KBP _Units
301G 302G 303G 304G 305G 306G 307G
Maximum Recurrent Peak Reverse Voltage
50 100 200 400 600 800 1000 V
Maximum RMS Voltage
35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
@T_A = 50°C
3.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load
80
A
(JEDEC method )
Maximum Instantaneous Forward Voltage
@ 3.14A
1.1
V
Maximum DC Reverse Current @ T_A=25°C
at Rated DC Blocking Voltage @ T_A=125°C
10
uA
500
uA
Typical Thermal Resistance (Note 1) RÛJA
Typical Thermal Resistance (Note 1) RÛJL
30.0
°C/w
11
Operating Temperature Range T_J
-55 to +150
°C
Storage Temperature Range T_STG
-55 to +150
°C
Note 1. Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on PCB
Note 1. With 0.47 x 0.47” (12 x 12mm) Copper Pads.
- 488 -