IS6051 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – LOW INPUT CURRENT INFRA-RED EMITTING DIODE & LIGHT ACTIVATED SCR

IS6051
LOW INPUT CURRENT INFRA-RED
EMITTING DIODE & LIGHT
ACTIVATED SCR
APPROVALS
l UL recognised, File No. E91231
DESCRIPTION
The IS6051 is an optically coupled isolator
consisting of infrared light emitting diode and a
light activated silicon controlled rectifier in a
standard 6pin dual in line plastic package.
FEATURES
l Options :-
10mm lead spread - add G after part no.
Surface mount - add SM after part no.
Tape&reel - add SMT&R after part no.
l High Isolation Voltage (5.3kV_RMS ,7.5kV_PK )
l High Surge Anode Current (5.0 A)
l High Blocking Voltage (400V*¹)
l Low Turn on Current (5mA typical)
l All electrical parameters 100% tested
l Custom electrical selections available
APPLICATIONS
l 10A, T²L compatible, Solid State Relay
l 25W Logic Indicator Lamp Driver
l 400V Symmetrical transistor coupler
2.54
7.0
6.0
7.62
max.
Dimensions in mm
1
6
2
5
3
4
8.3 max.
5.1
0.5
max.
min.
3.9
3.1
15°
Max
0.48
0.25
ABSOLUTE MAXIMUM RATINGS
(25°C unless otherwise specified)
Storage Temperature
-55°C to + 150°C
Operating Temperature
-55°C to + 100°C
Lead Soldering Temperature
(1/16 inch (1.6mm) from case for 10 secs) 260°C
INPUT DIODE
Forward Current
Forward Current (Peak)
(1µs pulse, 300pps)
Reverse Voltage
Power Dissipation
60mA
3A
6V
100mW
DETECTOR
Peak Forward Voltage
IS605
400V*¹
OPTION SM
SURFACE MOUNT
1.2
0.6
1.4
0.9
10.2
9.5
OPTION G
8.3 max
0.26
10.16
Peak Reverse Gate Voltage
RMS On-state Current
Peak On-state Current
(100µs, 1% duty cycle)
Surge Current (10ms)
Power Dissipation
6V
300mA
10A
5A
300mW
*1 IMPORTANT : A resistor must be connected
between gate and cathode (pins 4 & 6) to prevent false
firing
(R
GK
<
56kΩ)
ISOCOM COMPONENTS LTD
Unit 25B, Park View Road West,
Park View Industrial Estate, Brenda Road
Hartlepool, Cleveland, TS25 1YD
Tel: [phone] Fax :[phone]
13/11/97
ISOCOM INC
720 E., Park Boulevard, Suite 104,
Plano, TX 75074 USA
Tel: [phone]
Fax: [phone]
DB92611-AAS/A2