English
Language : 

IL91210EN Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – TONE/PULSEDIALER
IL91210EN
TONE/PULSEDIALER
The IL91210EN is a single-chip, silicon gate, CMOS integrated circuit with an on-chip oscillator for a
3.58 MHz crystal or ceramic resonator. It provides dialing pulse (DP) or dual tone multi-frequency
(DTMF) dialing. A standard 4x4 matrix keyboard can be used to support either DP or DTMF modes.
Up to 32 digits can be saved in the on-chip RAM for reading. In the DTMF mode, minimum tone
duration and minimum intertone pause are provided for rapid
dialing. Maximum tone duration is dependent upon the key
depression time in manual dialing.
• One touch redial operation
• Tone/Pulse switchable
• 32-digit capacity for redialing
• Built-in power up reset circuit
• PABX auto-pause is 2.2 second
• DTMF Timing:
Manual dialing: minimum duration for bursts and pauses
Redialing: calibrated timing
ORDERING INFORMATION
IL91210EN
TA = -20° to 70° C
• Wide operating voltage range: 2 V to 5.5 V
• Uses inexpensive ceramic resonator (3.58 MHz)
• Digits dialed manually after redialing are cascadable and stored as additional digits for the next
redialing
• Automatic mixed redialing (last number redial) of pulse to DTMF with multiple automatic access
pauses
• Four extra function keys: flash, pause, redial and DP or DTMF mixed dialing
• Four-by-four (or 2 of 8) keyboard can be used
• Low standby current
• Dial Pulse Rate: 10 pps
DC ELECTRICAL CHARACTERISTICS(VCC =3.5 V,FOSC=3.579 MHz, TOP=+25°C)
Symbol
Parameter
Test Conditions
Guaranteed Limits
Unit
Min
Max
VCC
DC Supply Voltage
2.0
5.5
V
VMR
Minimum Memory
Retention Voltage
VOC
Tone Output Voltage
VOR
Column
Row
VCC = 3.5 V
RL = 5KΩ
1.0
V
584
876
mVp-p
456
684
IOL1
Minimum Output Current, VOL = 0.4 V
XMUTE, KT, MODEOUT
0.5
mA
IOL2
Minimum Output Sink
Current, DP
VOL = 0.4 V
0.6
mA
IMR
Memory Retention Current VCC = 1.0 V, HK = VCC
All outputs unloaded
0.6
µA
ICCP Maximum Operation
ICCT
Current
Pulse mode
Tone mode
All outputs
unloaded
1.0
mA
2.0
ISBP
Maximum Standby
ISBT
Current
Pulse mode
HK=VCC=1.5 V
Tone mode
HK=GND
All outputs
unloaded.
No key
selected
0.05
µA
15
Korzhenevskogo 12, Minsk, 220064, Republic of
Belarus
Fax: +375 (17) 278 28 22,
Phone: +375 (17) 278 07 11, 277 24 70, 277 24 61,
277 69 16
E-mail: belms@belms.belpak.minsk.by
URL: www.bms.by