|
IL610 Datasheet, PDF (1/14 Pages) List of Unclassifed Manufacturers – Passive Input Digital Isolators | |||
|
Functional Diagram
IL610 IL611 IL612
IL613 IL614
Passive Input Digital Isolators
Features
⢠40 Mbps Data Rate
⢠Very Wide Input Voltage Range
⢠Open Drain or CMOS Outputs
⢠Failsafe Output (Logic high output for zero coil current )
⢠Output Enable
⢠3.3 V or 5 V Power Supply
⢠2500 VRMS Isolation (1 Minute)
⢠Low Power Dissipation
⢠-40°C to 85°C Temperature Range
⢠20 kV/µs Typical Common Mode Rejection
⢠UL1577 & IEC61010 Approval (pending)
⢠Available in MSOP, SOIC, and PDIP Packages
and as Bare Die
Applications
⢠CAN Bus/ Device Net
⢠General Purpose Opto Replacement
⢠Wired-OR Alarms
⢠SPI interface
⢠I2C
⢠RS 485, RS422, RS232
⢠Digital Fieldbus
⢠Size critical multi-channel applications
Description
The IL600 series are isolated signal couplers with CMOS or
open drain transistor outputs which can be used to replace
opto-couplers in many standard isolation functions. The
devices are manufactured with NVEâs patented IsoLoop®
GMR sensor technology giving exceptionally small size and
low power dissipation.
A single resistor is used to set maximum input current for
input voltages above 0.5 V. The devices are available in
SOIC, PDIP and MSOP packages and as bare die.
Isoloop® is a registered trademark of NVE Corporation.
*U.S. Patent number 5,831,426; 6,300,617 and others.
ISB-DS-001-IL612-A, January 20, 2005
NVE Corp., 11409 Valley View Road, Eden Prairie, MN 55344-3617, U.S.A.
Telephone: 952-829-9217, Fax 952-829-9189, www.isoloop.com
© 2005 NVE Corporation
|
▷ |