HPK600 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – MEDIUM VOLTAGE CHASSIS MOUNT RESISTORS

HPK600
MEDIUM VOLTAGE
CHASSIS MOUNT RESISTORS
Huntington Electric’s HPK600 Series of power resistors are state-of-the-art
600 Watt resistors that are compact and available in various resistance
values. Ideal for variable speed drives, power supplies, robotics, and
elevator controls or where an application requires advanced packaging in a
high dissipation case. Designed to dissipate 600 Watts into panel mounts
via a condensed footprint at voltages up to 5000 VDC.
600 WATTS
DIMENSION INFORMATION
ABCDE FGH J KLMN
±.03 (0.8) ±.008 (0.2) ±.02 (0.5) ±.008 (0.2) ±.008 (0.2) ±.03 (0.8) ±.02 (0.5) ±.005 (0.1) ±.02 (0.5) ±.02 (0.5) ±.02 (0.5) ±.02 (0.5) ±.02 (0.5)
2.362 1.417 0.197 1.339 2.244 2.560 0.709 0.164 0.276 0.197 0.591 1.181 1.260
(60.0) (36.0) (5.0) (34.0) (57.0) (65.0) (18.0) (4.2) (7.0) (5.0) (15) (30.0) (32.0)
ORDER INFORMATION
HPK600 - K - 100R
TYPE
TOLERANCE
K = 10%, J = 5%
RESISTANCE
100R = 100 OHMS
POWER RATING is based on 600 W at
85 C heat sink temperature. Use of
thermal conduction to heat sink is
required. Flatness of cooling plate
must be better than 0.05 mm overall,
and the roughness should not exceed
6.4 um.
STANDARD RESISTANCES
2
3
4
5
10
50
75
100
500 1000 5000 10000
ENGINEERING SPECIFICATIONS
Operating Temperature
Temp. Coefficient
-55 C to 150 C
±150 PPM/ C
Power Rating
Electric Strength Voltage
Insulation Resistance
Max Working Voltage
600 Watts at 85 C heat sink
6 KVAC, 50 HZ
10 GΩ min @ 500 V
5000 VDC
Short Time Overload
1000 W @70 C for 10 sec
Voltage Impulse
Capacitance/Mass
12 KV BIL
110 pF
Parallel Capacitance
40 pF
Inductance
80 nH
Max Mounting Torque
1.8 Nm
Max Terminal Torque
2 Nm
Creeping Distance
42 mm Minimum
Air Distance
14 mm Minimum
GENERAL CHARACTERISITCS
RESISTOR:
Unique designed for low inductance and
capacitance values. Stable element covering
high wattages and pulsed loadings.
CASE MATERIAL: Epoxy filled UL94-V0 with large creep
distance to mass.
TERMINALS:
Convenient electrical connection with
M4 or M5 screws.
DIMENSIONS: 2.24” X 2.55” (56.9 X 64.8 mm)
HUNTINGTON ELECTRIC, INC. P.O. BOX 366 HUNTINGTON, IN 46750 [phone] www.heiresistors.com