GS9009 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – GS9009 CABLE DRIVER WITH FOUR ADJUSTABLE OUTPUTS

GENLINX™ GS9009 Cable Driver
with Four Adjustable Outputs
DATA SHEET
FEATURES
• two output pairs, adjustable from 0 to 1100 mVp-p
into 75 Ω loads
• nominal 600 ps rise and fall times
• accepts SMPTE and standard ECL input levels
• operates from a single +5 or -5 volt supply
• on-chip DC restoration for low jitter
• 250 mW power dissipation
• interfaces with GENLINX™ GS9002, GS9004A,
GS9005A and GS9015A
APPLICATIONS
• SMPTE 259M Serial Digital Systems (4:2:2 & 4ƒsc)
• Other Serial Digital Video Interfaces - 360 Mb/s
• General purpose high speed driver applications
PIN CONNECTIONS
NC
NC
OUTPUT 1
OUTPUT 1
OUTPUT 2
OUTPUT 2
VSET
1
14 NC
2
13 _NC
3
12
GS9009
4
11
VCC
INPUT
5
10 INPUT
6
9 VEE
7
8 VREF
ORDERING INFORMATION
Part Number
GS9009 - CKB
Package Type
14 Pin SOIC
Temperature Range
0° to 70°C
DEVICE DESCRIPTION
The GENLINX™ GS9009 is a bipolar integrated circuit
designed to drive four 75 Ω co-axial cables at data rates
exceeding 400 Mb/s. It directly interfaces with other
GENLINX™ devices and can also be used as a general
purpose high speed cable driver.
The differential inputs are AC-coupled and internally DC-
restored which allows correct passage of pathological
check codes associated with the serial digital standards.
Even though the inputs are AC coupled, static protection
diodes at each input restrict the DC differential so that if
the driving source uses the opposite polarity power supply,
external DC blocking capacitors must be used.
Correctly terminated output signal levels are adjustable
from as low as 0 mV to as high as 1100 mV with little
change in other performance parameters. Performance is
guaranteed for output levels between 600 mV and
1000 mV. The gain of the output stages is varied by
adjusting the V_SET voltage with respect to an internal
bandgap reference voltage V_REF.
Pinout is compatible with the GS9007 by interchanging
pins 3,4,5,6,9,10,11,12 on the GS9009 with pins 1,2,3,4,5,6,7,8
on the GS9007. In this way, a layout can be made for either
device depending on whether adjustability is desired or
not.
The GS9009 is packaged in a 14 pin SOIC, and operates
from a single +5 or -5 volt supply consuming typically only
250 mW of power.
FUNCTIONAL BLOCK DIAGRAM
V_SET
GAIN
CONTROL
INPUT
INPUT
INPUT BUFFER
&
DC RESTORE
V_REF
BAND-GAP
REFERENCE
GS9009
V_CC (GND)
OUTPUT
DRIVER
OUTPUT 1
OUTPUT 1
OUTPUT
DRIVER
OUTPUT 2
OUTPUT 2
GND (V_EE)
Revision Date: January 1994
Patent No. 5,426,389.
Document No. 520 - 75 - 5
GENNUM CORPORATION P.O. Box 489, Stn A, Burlington, Ontario, Canada L7R 3Y3 tel. [phone] fax: [phone]
Japan Branch: A-302, M i yamae Village, 2–10–42 Mi yamae, Suginami–ku, Tokyo 168, Japan tel. [phone] fax [phone]