|
GFL-9722 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – Gas flow sensor | |||
|
Gas flow sensor
GFL-9722
Features
⢠Solid State reliability
⢠Low cost, small size
⢠Long-term stability (parts of a percent)
⢠Interchangeability (0.5%)
⢠Protective polymer coating
⢠Custom designs on request
Applications
⢠Flow detection
⢠Gas-flow measurements
⢠Flow control
⢠Absolute temperature measurement
⢠Fluid detection
Gas flow sensor
Description
The Gas Flow Sensor GFL-9722 is a ceramic based thermal sensor. It consists of two thick-film
heating resistors and a thick-film temperature sensor. Both temperature sensor and heating resis-
tors are laser trimmed which provides a true sensor-to-sensor interchangeability. The sensitive
parts of the sensor are coated with a black polymer, which protects them from harsh environments
like aggressive solvents, corrosive gasses and aggressive vapors.
When the GFL-9722 is heated by the heating resistors, a gas flow passing the sensor will cool it.
Because of this the output resistance will change. External temperature effects can be compensa-
ted using a second, not-heated, sensor connected in a Wheatstone bridge configuration.
Specifications (in air, ambient temperature 20 oC, 1 Atm.)
Parameter
typ units notes
Dimensions
Operating temperature
Storage temperature
7.5 x 7.5 mm
-40 to + 70 oC
-50 to + 170 oC
Heating resistor
Typical heating voltage
Max. heating voltage
50 ± 1 â¦
7V
9V
Temperature sensor
Stability
Sensitivity
Time constant
2000 ± 10
< 0.5
5.5 ± 0.5
3
â¦
%
â¦/ oC
sec.
depending on flow and mounting
Xensor Integration bv
Smart Sensor Devices
PO Box 3233 Distributieweg 28 Phone +31 (0)15-2578040 Founded 18 May 1988 ABN-AMRO 60 50 40 311
2601 DE Delft 2645 EJ Delfgauw Fax +31 (0)15-2578050 Trade reg. 27227437 IBAN NL42ABNA0605040311
The Netherlands The Netherlands Email
info@xensor.nl Site www.xensor.nl VAT NL 009122746 B01
copyright Xensor Integration
24 August 2005
page 1 of 3
|
▷ |