English
Language : 

FS6128-07 Datasheet, PDF (1/7 Pages) List of Unclassifed Manufacturers – PLL Clock Generator IC with VCXO
AMERICAN MICROSYSTEMS, INC.
FS6128-07
PLL Clock Generator IC with VCXO
August 2000
1.0 Features
• Matches MK3727 center frequency characteristics
• Phase-locked loop (PLL) device synthesizes output
clock frequency from crystal oscillator or external ref-
erence clock
• On-chip tunable voltage-controlled crystal oscillator
(VCXO) allows precise system frequency tuning
• 3.3V supply voltage
• Very low phase noise PLL
• Use with “pullable” 14pF crystals – no external pad-
ding capacitors required
• Small circuit board footprint (8-pin 0.150″ SOIC)
• Custom frequency selections available - contact your
local AMI Sales Representative for more information
2.0 Description
The FS6128 is a monolithic CMOS clock generator IC
designed to minimize cost and component count in digital
video/audio systems.
At the core of the FS6128 is circuitry that implements a
voltage-controlled crystal oscillator (VCXO) when an ex-
ternal resonator (nominally 13.5MHz) is attached. The
VCXO allows device frequencies to be precisely adjusted
for use in systems that have frequency matching re-
quirements, such as digital satellite receivers.
A high-resolution phase-locked loop generates an output
clock (CLK) through a post-divider. The CLK frequency is
ratiometrically derived from the VCXO frequency. The
locking of the CLK frequency to other system reference
frequencies can eliminate unpredictable artifacts in video
systems and reduce electromagnetic interference (EMI)
due to frequency harmonic stacking.
Figure 1: Pin Configuration
XIN 1
VDD 2
XTUNE 3
VSS 4
8 XOUT
7 VSS
6 VDD
5 CLK
8-pin (0.150″) SOIC
Table 1: Crystal / Output Frequencies
DEVICE
fXIN (MHz)
FS6128-07
13.500
NOTE: Contact AMI for custom PLL frequencies
CLK (MHz)
27.000
Figure 2: Block Diagram
XIN
XOUT
XTUNE
VCXO
PLL
DIVIDER
CLK
FS6128-07
American Microsystems, Inc. reserves the right to change the detail specifications as may be required to permit improvements in the design of its products.
ISO9001
8.8.00