FMT11D20C1 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – 1.3mm /1.1mm Ceramic Surface Mount Crystals

F, F11, FMT, FMT11 Series
1.3mm /1.1mm Ceramic Surface Mount Crystals
Lead-Free
RoHS Compliant
CALIBER
Electronics Inc.
PART NUMBERING GUIDE
Environmental/Mechanical Specifications on page F5
FMT11 D 20 C 1 29.4912MHz
Package
F
= 1.3mm max. ht. / Ceramic Glass Sealed Package
F11 = 1.1mm max. ht. / Ceramic Glass Sealed Package
FMT = 1.3mm max. ht. / Seam Weld “Metal Lid” Package
FMT11 = 1.1mm max. ht./ Seam Weld “Metal Lid” Package
Tolerance/Stability
A=±50/100
G=±20/10
B=±50/50
H=±10/10
C=±30/50
J =±10/20
D=±20/30
E=±15/30
F=±10/50
Mode of Operation
1=Fundamental
3=Third Overtone
5=Fifth Overtone
Operating Temperature Range
C=0°C to 70°C
E=-20°C to 70°C
F=-40°C to 85°C
Load Capacitance
S=Series, XX=XXpF (Pico Farads)
ELECTRICAL SPECIFICATIONS
Frequency Range
Frequency Tolerance/Stability
A, B, C, D, E, F
Operating Temperature Range
“C” Option, “E” Option, “F” Option
Aging @ 25°C
Storage Temperature Range
Load Capacitance
“S” Option
“XX” Option
Shunt Capacitance
Insulation Resistance
Drive Level
Revision: 1996-D
8.000MHz to 150.000MHz
See above for details!
Other Combinations Available. Contact Factory for Custom Specifications.
0°C to 70°C, -20°C to 70°C, -40°C to 85°C
±3ppm / year Maximum
-55°C to 125°C
Series
8pF to 50pF
7pF Maximum
500 Megaohms Minimum at 100Vdc
1mW Maximum, 100uW correlation
EQUIVALENT SERIES RESISTANCE (ESR)
Frequency (MHz)
ESR (ohms)
9.000 to 10.999
60
11.000 to 13.999
50
14.000 to 15.999
40
16.000 to 40.000
30
MECHANICAL DIMENSIONS
Frequency (MHz)
ESR (ohms)
35.000 to 39.990 (3rd OT) 60
40.000 to 49.990 (3rd OT) 60
50.000 to 89.999 (3rd OT) 60
90.000 to 150.000
100
Marking Guide
All Dimensions in mm.
5.00
±0.20
Kovar Lid for
“FMT Series”
7.00
+0.30
-0.20
2.54 ±0.20
4 1 _4.60
±0.20
32
41
32
Line 1:
Line 2:
CEI =
YM =
Frequency
CEI YM
Caliber Electronics
Date Code (year/month)
Pad Connection
1 Crystal In/OUt
2 Ground
3 Crystal in/Out
4 Ground
“H Dimension”
Ceramic Base all
1.00 ±0.20 (X4)
NOTE: Dimensions for Specific Packages
H = 1.3 Maximum for “F Series”
H = 1.3 Maximum for “FMT Series” / “Metal Lid”
H = 1.1 Maximum for “F11 Series”
H = 1.1 Maximum for “FMT11 Series” / “Metal Lid”
TEL [phone] FAX [phone] WEB http://www.caliberelectronics.com