EUAC220 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Current and Voltage Controls 3-Phase Sequence and Phase Loss

Current and Voltage Controls
3-Phase Sequence and Phase Loss
Type EUA
• 3-phase monitoring relay for phase
sequence/phase loss (closed circuit)
• Measures when all 3 phases are present and have
the correct phase sequence
• Measures on own power supply
• Knob-adjustable level setting
• Output: Up to 3 x 5 A SPDT relay
• For mounting on DIN-rail in accordance with
DIN/EN 50 022
• 45 mm Euronorm housing
• LED-indication for relay and power supply ON
Product Description
Ordering Key
3-phase line voltage monitor-
ing and phase sequence/
phase loss relay. Adjustment
on built-in potentiometer of
monitored voltage within
±15% of rated operational
voltage. For mounting on DIN-
rail. Frequently used to se-
cure the right phase sequence
when applying a load to a 3-
phase electrical network.
Housing
Function
Type
Output
Power supply
EUA C 400
Type Selection
Mounting Output
For DIN-rail 1 SPDT
2 SPDT
3 SPDT
Supply: 220 VAC
EUA C 220
EUA D 220
EUA T 220
Supply: 400 VAC
EUA C 400
EUA D 400
EUA T 400
Supply: 480 VAC
EUA C 480
EUA D 480
EUA T 480
Supply: 600 VAC
EUA C 600
EUA D 600
Input Specifications
Input U, V, W
Measuring ranges
ON-level
Voltage setting
L1 - L2 - L3
measures on own supply
220 187-253 VAC
400 340-460 VAC
480 408-552 VAC
600 510-690 VAC
70% of voltage setting
±15% (of rated operational
voltage)
Output Specifications
Output
1, 2 or 3 x SPDT relay
Rated insulation voltage
250 VAC (contact/elect.)
Contact ratings (AgCdO)
Resistive loads
AC 1
DC 1
Small inductive loads AC 15
DC 13
µ (micro gap)
5 A, 250 VAC
5 A, 24 VDC
2 A, 250 VAC
3 A, 24 VDC
Mechanical life
≥ 40 x 10⁶ operations
Electrical life
≥ 10⁵ operations
(at max. load)
Operating frequency
≤ 7200 operations/h
Dielectric strength
Dielectric voltage
2 kVAC (rms)
Rated impulse withstand volt. 4 kV (1.2/50 µs)
Supply Specifications
Power supply
Rated operational voltage
Through term. U, V, W 220
400
480
600
Voltage interruption
Dielectric voltage
Rated impulse withstand
voltage up to 480 VAC
up to 600 VAC
Rated operational power
Supplied from
Overvoltage cat. III (IEC 60664)
(IEC 60038)
220 VAC, ±15%
50/60 Hz, -5/+5 Hz
400 VAC, ±15%
50/60 Hz, -5/+5 Hz
480 VAC, ±15%
50/60 Hz, -5/+5 Hz
600 VAC, ±15%
50/60 Hz, -5/+5 Hz
≤ 40 ms
None
4 kV (1.2/50 µs)
6 kV (1.2/50 µs)
2.5 VA
L1 & L3
Specifications are subject to change without notice (10.01.00)
1