ER13150 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Primary lithium batteries

R
Primary Lithium Battery Expert
Primary lithium batteries
ER13150 3.6V 450mAh
3.6V Primary lithium-thionyl chloride
(Li-SOCl2) Energy type
bobbin cell
For low drain / long tetm operating
applications requesting superior
voltage response in -55 ~+85
environments.
Cell size references
Alternative models
Electrical characteristics
(typical values relative to cells stored for one year or less at +30 max.)
Nominal capacity
(at 0.5 mA +20 2.0V cut off. The capacity restored by the cell varies
according to current drain, temperature and cut off).
0.45Ah
Open circuit voltage (at +20 )
3.66V
Nominal voltage (at 0.5mA +20 )
3.6V
Pulse capability: Typically up to 20 mA (30 mA/0.1 second pulses,
drained every 2 mn at +20 from undischarged cells with 10 A base
current, yield voltage readings above 3.0V. The readings may vary according
to the pulse characteristics, the temperature, and the cell s previous history.
Fitting the cell with a capacitor may be recommended in severe conditions.
Consult ABLE)
Max. Continuous current
Max. Pulse current
10mA
20mA
Storage
(recommended)
(for more severe conditions, consult ABLE)
+30 +86 F max
Operating temperature range
(Operation above ambient T may lead to reduced capacity and
lower voltage readings at the beginning of pulses. Consult ABLE)
-55 / +85
-76 F / +185 F
Physical characteristics
Diameter (max)
Height (max)
Typical weight
Available termination suffix
13mm(0.45 in)
15mm(0.6 in)
5.5g(0.18oz)
radial tabs, radial pins, axial leads, flying leads
Tel:[phone]/63 Fax:[phone] Email:[e-mail] website:www.able-battery.com