EO1804NPAS Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Photoelectrics Diffuse-reflective

Photoelectrics
Diffuse-reflective
Type EO1804.PAS, DC, Metal-housing
• Range: 400 mm adjustable
• Modulated, infrared light
• Supply voltage: 10 to 40 VDC
• Output: 200 mA NPN or PNP
• Make and break switching function, LED indication
• Protection: Reverse polarity, short-circuit, transients
• High immunity to ambient light
• Heavy duty M18 metal housing, IP67
• Cable and plug versions
Product Description
Ordering Key
The EO1804 is a family of
general purpose Diffuse-
reflective sensors in a short
M18 metal housing for
heavy duty applications.
They are useful for simple
applications where a basic
sensor provides adequate
sensing performance. The
sensors are easy to adjust
with 270° single turn poten-
tiometer. The output is a 4-
wire complementary (NO
and NC) output in NPN (cur-
rent sinking) or PNP (current
souring).
Type
Housing diameter
Range
Output type
Housing material
Connection type
EO 18 04 NPA S-1
Type Selection
Housing
diameter
M18
Rated
operating
dist. (Sn)
400 mm
Ordering no.
NPN/cable
Make & break swit.
EO 1804 NPAS
Ordering no.
NPN/plug
Make & break swit.
EO 1804 NPAS-1
Ordering no.
Ordering no.
PNP/cable
PNP/plug
Make & break swit. Make & break swit.
EO 1804 PPAS
EO 1804 PPAS-1
Specifications
Rated operating dist. (Sn)
Adjustable
Sensitivity
Temperature drift
Hysteresis (H)
(Differential travel)
Rated operational volt. (UB)
Ripple (Urpp)
Output current
Continuous (Ie)
Short-time (I)
No load supply current (IO)
Min. operational current (Im)
OFF-state current (Ir)
Voltage drop (Ud)
Protection
Transient voltage
Light source
Up to 400 mm
Reference target:
Kodak test card R27, white,
90% reflectivity
200 x 200 mm
270° turn potentiometer
0.4%/K
3 to 20%
10 to 40 VDC (ripple included)
Max. 10%
Max. 200 mA
200 mA,
max. load capacity 100 nF
Max. 20 mA
0.5 mA
Max. 100 μA
Max. 2.5 V @ 200 mA
Reverse polarity, short circuit,
transients
Max. 1 kV/0.5 J
GaAlAs LED, 880 nm
Light type
Sensing angle
Ambient light
Operating frequency (f)
Response time
OFF-ON (tON)
ON-OFF (tOFF)
Power ON delay (tV)
Indication function
Output ON
Environment
Overvoltage category
Pollution degree
Degree of protection
Temperature
Operating
Storage
Vibration
Shock
Dielectric voltage
Infrared,
modulated synchronized
± 25° at ¹/2 range
Max. 10,000 lux
120 Hz, light/dark ratio 1:2
≤ 3.2 ms
≤ 5 ms
Typ. 100 ms
Dark and light
(complementary switch)
LED, yellow
III (IEC 60664/60664A; 60947-1)
3 (IEC 60664/60664A; 60947-1)
IP 67 (IEC 60529; 60947-1)
-20° to +60°C (-4° to 140°F)
-30° to + 70°C (-22° to 158°F)
10 to 150 Hz, 0.5 mm/7.5 g
(IEC 60068-2-6)
2 x 1 m & 100 x 0.5 m
(IEC 60068-2-32)
500 VAC (IEC 60365-4-41)
Specifications are subject to change without notice (08.02.06)
1