EKXJ161EXX390MJ16S Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
160 to 450Vdc long life, 105C
@Downsized and Longer life from current KXG series
@Endurance with ripple current : 10,000 to 12,000 hours at 105C
@Rated voltage range : 160 to 450V, Capacitance range : 6.8 to 680MF
@For electronic ballast circuits and other long life applications
@Non solvent resistant type
@RoHS Compliant
KXJ
Downsized
KXG
?SPECIFICATIONS
Items
Characteristics
Category
Temperature Range ^{-40 to +105C (160 to 400Vdc)}
-25 to +105C (420, 450Vdc)
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tanE)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
160 to 450Vdc
P20% (M)
(at 20C, 120Hz)
After 1 minute
After 5 minutes
CV[1000
CV>1000
I=0.1CV+40
I=0.04CV+100
I=0.03CV+15
I=0.02CV+25
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
(at 20C)
Rated voltage (Vdc)
160 to 250V 350 to 450V
tanE (Max.)
0.20
0.24
(at 20C, 120Hz)
Rated voltage (Vdc)
160 to 250V 350, 400V 420, 450V
Z(-25C)/Z(+20C)
3
5
6
Z(-40C)/Z(+20C)
6
6
-
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated
ripple current is applied for 12,000 hours (10,000 hours for 20L max.) at 105C.
Capacitance change [P20% of the initial value
D.F. (tanE)
[200% of the initial specified value
Leakage current
[The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1000 hours at 105C without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change [P20% of the initial value
D.F. (tanE)
[200% of the initial specified value
Leakage current
[500% of the initial specified value
?DIMENSIONS [mm]
@Terminal Code : E
Sleeve (PET : Brown)
Vent
L'
15min.
4min.
(F10)
(F12.5 to F18)
Gas escaped end seal
?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E KX J AAA E AA AAA M AAA S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 6.8MF:6R8,10MF:100,100MF:101)
Lead forming·taping code
Terminal code
Voltage code (ex. 160V:161,400V:401)
Series code
Category
Please refer to "Product code guide (radial lead type)"
fD 10 12.5 14.5 16 18
fd 0.6 0.6 0.8 0.8 0.8
F 5.0 5.0 7.5 7.5 7.5
fD'
FD+0.5max.
L'
L+1.5max.
?RATED RIPPLE CURRENT MULTIPLIERS
@Frequency Multipliers
Frequency (Hz)
120
1k
10k 100k
Less than 100mF 1.00 1.75 2.25 2.50
100mF or more
1.00 1.67 2.05 2.25
The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5C rise.
When long life performance is required in actual use, the rms ripple current has to be reduced.
(1/3)
CAT. No. E1001I