EF1801NPAS Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – Photoelectrics Fiber Optic Sensor

Photoelectrics
Type EF 1801
Fiber Optic Sensor
• Range: Fiber dependent, typ. 100 mm
• Adjustable sensitivity
• Modulated, red light
• Rated operational voltage: 10 to 40 VDC
• Output: DC 200 mA NPN or PNP
• Make and break switching function, LED indication
• Heavy duty M18 metal housing, IP 67
• Cable and plug versions
• For 2.2 mm fiber cable with 1 mm core
• MB 18 A for DIN-rail mounting (see Accessories)
Product Description
Ordering Key
Used in through-beam, retro-
reflective or diffuse-reflective
applications depending upon
how the additional fibers are
mounted. Easily adjustable
sensitivity with 270° potentio-
meter. LED indication for out-
put ON. Short M18 metal
housing for heavy duty appli-
cations. The fiber allows posi-
tioning and mounting in tight
spaces with the photoelectric
sensor itself mounted in a
more convenient location.
Type
Housing diameter
Range
Output type
Housing material
Connection type
EF 18 01 PPA S - 1
Type Selection
Housing
diameter
Rated
operating
dist. (Sn)
Ordering no.
NPN/cable
Make & break swit.
M18
Fiber depend. EF 1801 NPAS
Ordering no.
NPN/plug
Make & break swit.
EF 1801 NPAS-1
Ordering no.
Ordering no.
PNP/cable
PNP/plug
Make & break swit. Make & break swit.
EF 1801 PPAS
EF 1801 PPAS-1
Specifications
Rated operating dist. (Sn)
Temperature drift
Hysteresis (H)
(Differential travel)
Rated operational volt. (UB)
Ripple (Urpp)
Output current
Continuous (Ie)
Short-time (I)
No load supply current (IO)
Min. load current (Im)
OFF-state current (Ir)
Voltage drop (Ud)
Protection
Transient voltage
Sensitivity
Light source
Light type
Fiber dependent
0.4%/K
3 to 20%
10 to 40 VDC
(ripple included)
≤10%
≤ 200 mA
200 mA,
max. load capacity 100 nF
≤ 20 mA,
0.5 mA
≤ 100 µA
≤ 2.5 V
Reverse polarity,
short circuit, transients
Max. 1 kV/0.5 J
Adjustable, 270° turn
potentiometer,
660 nm
Red,
modulated, synchronized
Operating frequency (f)
Response time
OFF-ON (tON)
ON-OFF (tOFF)
Power ON delay (tV)
Indication
Output ON
Environment
Overvoltage category
Pollution degree
Degree of protection
Temperature
Operating
Storage
Vibration
Shock
Dielectric voltage
Housing material
Body
Front
Cable end
Nuts
120 Hz, light/dark ratio 1:2
≤ 3.2 ms
≤ 5 ms
Typ. 100 ms
LED, yellow
III (IEC 60664/664A; 60947-1)
3 (IEC 60664/664A; 60947-1)
IP 67 (IEC 60529; 60947-1)
-20° to +60°C (-4° to 140°F)
-30° to + 70°C (-22° to 158°F)
10 to 150 Hz, 0.5 mm/7.5 g
(IEC 60068-2-6)
2 x 1 m & 100 x 0.5 m
(IEC 60068-2-32)
500 VAC (rms)
Nickel-plated brass
TPE/POM, black
Polyester, black
Nickel-plated brass
Specifications are subject to change without notice (06.03.2006)
1