ECS-2200 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – 8 PIN DIP CLOCK OSCILLATOR

ECS-2200 SERIES 8 PIN DIP CLOCK OSCILLATOR
The ECS-2200 Series clock oscillator can
drive both HCMOS and TTL logic. This
oscillator also features tri-state enable/disable
capabilities in an 8 pin DIP package.
FEATURES
• 50pF HCMOS/TTL logic
• Tri-State enable/disable
• Wide frequency range
• Resistance weld package
• 3.3V operation (optional)
PART NUMBERING GUIDE
PART NUMBER *
FREQUENCY STABILITY
ECS-2200A
±100 PPM
ECS-2200B
±50 PPM
ECS-2200C
±25 PPM
* Complete part number to include frequency. i.e. ECS-2200A-100 (100 = 10.000MHz)
OPERATING CONDITIONS/ELECTRICAL CHARACTERISTICS
PARAMETERS
FREQUENCY RANGE (fo)
OPERATING TEMP. RANGE (TOPR)
STORAGE TEMP. RANGE (TSTG)
FREQUENCY STABILITY
INPUT CURRENT (IDD)
OUTPUT SYMMETRY
RISE TIME (TR)
FALL TIME (TF)
OUTPUT VOLTAGE
OUTPUT CURRENT
(VOL)
(VOH)
(IOL)
(IOH)
OUTPUT LOAD
START-UP TIME (TS)
SUPPLY VOLTAGE (VDC)
FREQUENCY RANGE
1.000 ~ 150.000
1.000 ~ 150.000
1.000 ~ 150.000
1.000 ~ 150.000
1.000 ~ 25.000
25.000 ~ 50.000
50.000 ~ 80.000
80.000 ~ 150.000
1.000 ~ 80.000
80.000 ~ 150.000
1.000 ~ 150.000
1.000 ~ 150.000
1.000 ~ 150.000
1.000 ~ 150.000
1.000 ~ 150.000
1.000 ~ 150.000
1.000 ~ 150.000
1.000 ~ 80.000
80.000 ~ 150.000
1.000 ~ 150.000
CONDITIONS
All conditions*
MINIMUM
1.000
0
-55
-100
50% VDD level
45
50% VDD level
40
10% ~ 90% VDD level
90% ~ 10% VDD level
IOL = 16 mA
IOH = -16 mA
4.5
VOL = 0.5 V
VOH = 4.5 V
TTL
HCMOS
HCMOS
0.0V TO 5.0V
+5.0 ±0.25
* Inclusive of 25˚C tolerance, operating temperature range, input voltage change, load change, aging, shock and vibration.
** An internal pullup resistor from pin 1 to pin 14 allows active output if pin 1 is left open.
TYPICAL
17
33
45
67
50 ±3
50 ±3
MAXIMUM
150.000
+70
+125
+100
25
46
77
82
55
60
5
5
0.5
16
-16
10
50
30
10
UNITS
MHz
˚C
˚C
PPM
mA
mA
mA
mA
%
%
nS
nS
V
V
mA
mA
TTL
pF
pF
mS
VDC
PACKAGE DIMENSIONS (mm)
TF
1 LEVEL
TR
2.4VDC
1.4VDC
0.5
1
4
13.2 max
0 LEVEL
40% min
60% max
0.4VDC (0.5VDC)
0 VDC
Figure 2) TTL Output Wave Form
Open
1
8
4 _TP
5
0.01µF
CL=
15pf
+5.0V
+5.0V
RL
IN916 x 4
Figure 3) TTL Test Circuit
8
5
7.62
Figure 1) ECS-2200 Series – Side,
Bottom and Top views
TF
1 LEVEL
TR
90% VDD DC
50% VDD DC
0 LEVEL
40% min
60% max
10% VDD DC
0 VDC
Figure 4) HCMOS Output Wave Form
Open
1
4
8
5
TP
0.01µF
CL
+5.0V
Figure 5) HCMOS Measurement
Circuit (CL = 15pF)
PIN CONNECTIONS
#1
H or Open
#4
Ground
#5
Output
#8
GND
L
GND/CASE CND
High Impedance
+5VDC
ENABLE / DISABLE FUNCTION**
INH (PIN 1)
OUTPUT (PIN 8)
OPEN***
ACTIVE
1 LEVEL VIH ≥ 2.2 V
(VIH ≥ 2.0 V
ABOVE 70MHz)
ACTIVE
‘0’ LEVEL VIL ≤ 0.8 V
HIGH Z
ESC-2200 STAND-BY-FUNCTION
#1 (Control Term.) Open or “H”
“L”
#5 (Output Term.) Oscillation “H” Level
ECS, INC. INTERNATIONAL 1105 S. RIDGEVIEW, OLATHE, KS 66062 • 913-782-7787 • 800-237-1041 • FAX [phone] • WWW.ECSXTAL.COM
OSCILLATORS 34 OSCILLATORS