EBECT2310H Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Timers Interval, Delay on Release

Timers
Interval, Delay on Release
Type EBE
• Time range 0.1 s to 10 h
• Pulse start
• Knob-adjustable time setting
• Knob selection of time range
• Oscillator-controlled time circuit
• Repeat accuracy: ≤ 0.2%
• Output: 5 A SPDT or 5 A DPDT
• For mounting on DIN-rail in accordance with
DIN/EN 50 022
• 22.5 mm housing
• LED-indication for relay and power supply ON
• Combined AC and DC power supply
Product Description
Ordering Key
Mono-function, pulse con-
trolled interval timer with 3
selectable time ranges with-
in 0.1 s to 1 m or 1 m to 10 h.
For mounting on DIN-rail.
Often used in applications
such as flushing systems,
dosing plants, lighting
systems, etc.
Housing
Function
Type
Output
Power supply
Time range
EBE C T23 1M
Type Selection
Mounting Output
Time range
For DIN-rail
SPDT
SPDT
DPDT
DPDT
DPDT
DPDT
DPDT
DPDT
0.1 s - 1 m
1 m - 10 h
0.1 s - 1 m
1 m - 10 h
0.1 s - 1 m
1 m - 10 h
0.1 s - 1 m
1 m - 10 h
Supply:
24 VAC/DC
& 115-230 VAC
EBE C T23 1M
EBE C T23 10H
Supply:
24 VAC/DC
EBE D 024 1M
EBE D 024 10H
Supply:
115 VAC
Supply:
230 VAC
EBE D 115 1M
EBE D 115 10H
EBE D 230 1M
EBE D 230 10H
Time Specifications
Time ranges
Type 1 M
Selectable by rotary switch
Type 10 H
Selectable by rotary switch
Repeat accuracy
Time range accuracy
Range 1 s
Temperature drift
Reset
0.1 s - 1 s
1 s - 10 s
0.1 m - 1 m
1 m - 10 m
0.1 h - 1 h
1 h - 10 h
≤ 0.2%
±10% on max.
min. actual time
≤ min. set time
Min. time ≤ 0.15 s
≤ 0.2%/°C (≤ 0.11%/°F)
Power supply interruption
≥ 200 ms
Interconnect terminals
A1 & Y1
Reaction time: ≤ 100 ms
Output Specifications
Output
Type C
Type D
SPDT relay
DPDT relay
Rated insulation voltage
250 VAC (contact/elect.)
Contact ratings (AgCdO)
Resistive loads
AC 1
DC 1
Small inductive loads AC 15
DC 13
Mechanical life
Electrical life
µ (micro gap)
5 A, 250 VAC
5 A, 24 VDC
2 A, 250 VAC
3 A, 24 VDC
≥ 40 x 10⁶ operations
≥ 10⁵ operations
(at max. load)
Operating frequency
≤ 7200 operations/h
Dielectric strength
Dielectric voltage
2 kVAC (rms)
Rated impulse withstand volt. 4 kV (1.2/50 µs)
Specifications are subject to change without notice (27.12.99)
1