EAACT2310H Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Timers Delay on Operate

Timers
Delay on Operate
Type EAA
• Time range 0.1 s to 10 h
• Automatic start
• Knob-adjustable time setting
• Knob selection of time range
• Oscillator-controlled time circuit
• Repeat accuracy: ≤ 0.2%
• Output: 5 A SPDT or 5 A DPDT
• For mounting on DIN-rail in accordance with
DIN/EN 50 022
• 22.5 mm Euronorm housing
• LED-indication for relay and power supply ON
• Combined AC and DC power supply
Product Description
Ordering Key
Mono-function timer with 3
selectable time ranges within
0,1 s to 1 m or 1 m to 10 h.
For mounting on DIN-rail.
Often used to prevent over-
loading the power distribution
system, when e.g. pumps
should not be switched on at
the same time.
Housing
Function
Type
Output
Power supply
Time range
EAA C T23 1M
Type Selection
Mounting
Output
For DIN-rail
SPDT
SPDT
DPDT
DPDT
Time range
0.1 s - 1 m
1 m - 10 h
0.1 s - 1 m
1 m - 10 h
Time Specifications
Time ranges
Type 1 M
Selectable by rotary switch
Type 10 H
Selectable by rotary switch
Time range accuracy
Repeat accuracy
Time variation
Within rated power supply
and ambient temperature
Reset
Time and relay
0.1 s - 1 s
1 s - 10 s
0.1 m - 1 m
1 m - 10 m
0.1 h - 1 h
1 h - 10 h
±10% on max.
min. setting: actual time
≤ min. set time
≤ 0.2%
≤ 0.05%/V
≤ 0.2%/°C
Power supply interruption
≥ 200 ms
Supply: 24 VAC/DC & 115-230 VAC
EAA C T23 1M
EAA C T23 10H
EAA D T23 1M
EAA D T23 10H
Output Specifications
Output
Type C
Type D
SPDT relay
DPDT relay
Rated insulation voltage
250 VAC (contact/elect.)
Contact ratings (AgCdO)
Resistive loads
AC 1
DC 1
Small inductive loads AC 15
DC 13
µ (micro gap)
5 A, 250 VAC
5 A, 24 VDC
2 A, 250 VAC
3 A, 24 VDC
Mechanical life
≥ 40 x 10⁶ operations
Electrical life
≥ 10⁵ operations
(at max. load)
Operating frequency
≤ 7200 operations/h
Dielectric strength
Dielectric voltage
2 kVAC (rms)
Rated impulse withstand volt. 4 kV (1.2/50 µs)
Specifications are subject to change without notice (21.12.99)
1