DE-ACCM3D Datasheet, PDF (1/5 Pages) List of Unclassifed Manufacturers – Buffered ±3g Tri-axis Accelerometer

DE-ACCM3D Buffered ±3g Tri-axis Accelerometer
General Description
The DE-ACCM3D is a complete 3D ±3g
analog accelerometer solution. It features
integrated op amp buffers for direct connection
to a microcontroller’s analog inputs, or for
driving heavier loads.
The onboard 3.3V regulator and decoupling
capacitor give you great flexibility when
powering the device, and can also be
bypassed for operation down to 2.0V.
The DE-ACCM3D is designed to fit the DIP-16
form factor, making it suitable for
breadboarding, perfboarding, and insertion
into standard chip sockets.
It is based on the Analog Devices ADXL330
for superior sensitivity and tighter accuracy
tolerances.
Features
Triple axis ±3g sense range
Up to 360mV/g sensitivity
500Hz bandwidth
Operating voltage 3.5V to 15V (onboard regulator)
Operating voltage 2.0V to 3.6V (without regulator)
3.3V regulator can power external microcontroller
Reverse voltage protection
Output short protected
Standard DIP-16 form factor
Integrated power supply decoupling
Draws 0.9mA
Can accurately drive 500Ω loads
Applications
Motion, tilt and slope measurement
Device positioning
Shock sensing
Vehicle acceleration logging