DC11 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – TRIODE

DC11
POWER ENTRY MODULES WITHOUT LINE FILTER
Actual information about approvals can be found on
http://www.schurter.com/approvals
C14
70° C
Description
- Panel mount:
Screw-on version from front or rear side, snap-in version from front
side
- 2 Functions:
Connector Protection class I, Line switch 1- or 2-pole
- Quick connect terminals 4.8 x 0.8 mm
- Alternative: version with line filter DC12
- Substitute for type KEB1; KEB2
Technical data
Ratings IEC
Ratings UL/CSA
Dielectric strength
Allowable operation temp.
Degree of protection
Protection class
Terminals
Panel thickness s
Materials: Housing
10 A / 250 VAC; 50 Hz
12 A / 250 VAC; 50/60 Hz
> 2.5 kVAC between L-N
> 3 kVAC between L/N-PE
(1 min/50 Hz)
-25 °C to 70 °C
from front side IP40 acc. to IEC 60529
Suitable for appliances with protection
class I acc. to IEC 61140
Quick connect terminals 4.8 x 0.8 mm
Screw-on: max 6 mm
Mounting screw torque max 0.5 Nm
Snap-in: 1/1.5/2/2.5/3 mm
Thermoplastic, black, UL 94V-2
Characteristics
- Ultra-compact design
- All single elements are already wired
Unwired versions available on request
- Line switch non-illuminated or illuminated
- Ideal for application with high transient loads
- Qualified for use in equipment according IEC/EN 60950
Other versions on request:
- snap-in, panel thickness 1 and 3 mm
- unwired versions
- solder terminals
- line switch with other rocker marking
- line switch 1-pole
- for protection class II
Appliance-inlet /-outlet
Line switch
C14 acc. to IEC/EN 60320-1,
UL 498, CSA C22.2 no. 42 (for cold
condition) pin-temperature 70 °C, 10 A,
Protection class I
Rocker switch 1- or 2-pole, non-illumi-
nated or illuminated red or green, acc.
to IEC 61058-1
Technical details GENERAL PRO-
DUCT INFORMATION
SDcimrewen-osniomnsounting
1 www.schurter.com