D38920000024 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Repeater

Repeater
Type D 3892 0000
Du line^®
Fieldbus Installationbus
• Repeaters make any transmission-distance
possible (cascading of repeaters possible)
• Power-booster for applications with several
Dupline^®-supplied units
• Minimized delay (max. 1 Dupline^® scan)
• Number of channels adjusted automatically
• H8-housing
• LED-indication for power supply, primary Dupline^® OK
and secondary Dupline^® (follows Dupline^® carrrier)
• Built-in channel generator function for secondary
Dupline^®
• AC power supply
Product Description
Ordering Key
D 3892 0000 230
The Dupline^® Repeater is used
to increase the distance in a
Dupline^® network. Further-
more, it can be used as a
"Power-booster" in sections
with several Dupline^®-supplied
units.
Type: Dupline^®
H8-housing
Channel Generator (secondary Dupl.)
Power supply
Type Selection
Supply
24 VAC
115 VAC
230 VAC
Ordering no.
D 3892 0000 024
D 3892 0000 115
D 3892 0000 230
Input Specifications
Input
Dielectric voltage
Primary Dupline to
Secondary Dupline^®
Primary Dupline^®
≥ 2 kVAC (rms)
Supply Specifications
Power supply
Overvoltage cat. III (IEC 60664)
Rated operational voltage
through term. 21 & 22 230 230 VAC, ±15% (IEC 60038)
115 115 VAC, ±15% (IEC 60038)
24 24 VAC, ±15%
Frequency
45 to 65 Hz
Voltage interruption
≤ 40 ms
Rated operational power
6 VA
Power dissipation
≤7W
Rated impulse withstand
voltage
230 4 kV
115 2.5 kV
24 800 V
Dielectric voltage
Supply - Primary Dupline^® ≥ 4 kVAC (rms)
Supply - Secondary Dupline^® ≥ 4 kVAC (rms)
Output Specifications
Output
Number of outputs
Output voltage
Current
Short-circuit protection
Output impedance
Sequence time
Distance to transmitters
Secondary Dupline^®
1
8.2 VDC
≤ 45 mA
≤ 60 s
≤ 15 Ω
Follows primary Dupline^®
100%
General Specifications
Power ON delay
Indication for
Supply ON
Primary Dupline^® OK
Secondary Dupline^® carrier
Environment
Degree of protection
Pollution degree
Operating temperature
Storage temperature
Humidity (non-condensing)
Mechanical resistance
Shock
Vibration
Dimensions
Material
(see "Technical Information")
Weight
≤5s
LED, green
LED, yellow
LED, yellow
IP 40
3 (IEC 60664)
0° to +50°C (+32° to +122°F)
-50° to +85°C (-58° to +185°F)
20 to 80% RH
15 G (11 ms)
2 G (6 to 55 Hz)
H8-housing
485 g
Specifications are subject to change without notice (28.04.03)
1
Dupline^® is a registered trademark. A product of the CARLO GAVAZZI Group