CPL-259-1 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – UHF Straight Crimp Type Plug -Crimp Contact

INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
UHF Straight Crimp Type Plug -
Crimp Contact
PART NUMBER CABLE TYPE
CPL-259-1
RG-58
“A”
“B”
WIRE GAUGE WIRE DECIMAL
JACKET O.D.
.754 (19.15) .810 (20.57)
20
.0325 (0.83) .185 (4.70)-.205 (5.21)
1. Identify connector parts. (3 piece
parts)
Except CPL-259-10 (1 Piece)
2. Slide crimp sleeve over cable and
strip cable to dimensions shown.
Do not nick center conductor dur-
ing strip operations. (CPL-259-10:
trim braid and insulation to .300
(7.62).
3. Slide coupling nut onto the con-
nector body. Then slide the con-
nector body over cable so that the
center conductor extends through
the front of the contact. Crimp the
contact as shown. Trim away the
center conductor extending past
the contact. (CPL-259-10: fold
braid onto jacket before sliding
connector body onto cable.)
4. Arrange braid uniformly around
crimp stem. Slide crimp sleeve
over braid and crimp securely
using recommended crimp tool.
Part
Number
CPL-259-1
Cable
RG-58
Wire
Gauge
20
Wire
Decimal
.0325
Jacket
O.D.
.185 (4.07)-.205 (5.21)
Crimp
(Braid Hex)
.255 (6.48)
Crimp
(Strain Relief)
.213 (5.41)
Contact
Crimp Hex
.065 (1.65)
Recommended
Crimp Tool
24-307
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 • 1-800-243-8814 • Fax: [phone] • www.cambridgeproducts.com