CMM6003-SC Datasheet, PDF (1/5 Pages) List of Unclassifed Manufacturers – 50MHz to 870 MHz High Dynamic Range Amplifier

CMM6003-SC
Advanced Product Information
May 2003
(1 of 5)
Features
❏ 50 MHz to 870 MHz Frequency Range
❏ +41 dBm Output IP3
❏ 1.6 dB Noise Figure (@450 MHz)
❏ 17 dB Gain
❏ 22 dBm P1dB
❏ SOT-89 SMT Package
❏ Single Power Supply
❏ +3V to +5V Voltage Rail
50 MHz to 870 MHz
High Dynamic Range
Amplifier
Functional Block Diagram
Ground
4
1
2
3
Input Ground Output
Bias
Description
The CMM6003-SC is a high dynamic range amplifier
designed for applications operating within the 50 MHz to 870
MHz frequency range. It is an ideal solution for transmit and
receive functions where high linearity is required.
The amplifier has the flexibility of being optimized
for a number of wireless applications. The combination of
gain flatness, bandwidth, low NF and high IP3 at the same
bias point make it an ideal transmit or receive solution when
used in intermediate frequency applications.
The CMM6003-SC is packaged in a low-cost, space
efficient, surface mount SOT-89 package which provides
excellent electrical stability and low thermal resistance. All
devices are 100% RF (at 800 MHz) and DC tested.
Electrical Characteristics
Unless otherwise specified, the following specifications are guaranteed at room temperature
in a Celeritek test fixture.
Parameter
Condition
Min Typ Max Units
Frequency Range
Gain
Input Return Loss
Externally matched
Externally matched
50 800 870 MHz
15 17 18 dB
-11
dB
Output IP3
+41
dBm
Noise Figure
Noise Figure
@50 MHz
@ 800 MHz
1.9
dB
3.3
dB
Output P1dB
Operating Current Range
Supply Voltage
22
dBm
120 150 180 mA
5.0
V
Typical Parameters
Parameter
Frequency Range
Gain
Input Return Loss
Output Return Loss
Output IP3
Output P1dB
Noise Figure
450
17.2
-12.0
-16
+39
23.6
1.6
Typical
800
16.5
-11.5
870
16.25
-10.5
-14 -13
+41 +41
23.7 23.8
1.9 2.0
Units
MHz
dB
dB
dB
dBm
dBm
dB
Notes:
1. Typical values reflect performance in recommended application circuit.
Notes:
1. T = 25°C, Vdd = 5.0, Frequency = 800 MHz, 50 Ohm system
2. OIP3 measured with two tones at output power of 10 dBm/tone separated by 10 MHz.
Absolute Maximum Ratings
Parameter
Supply Voltage
RF Input Power
Rating
+6.0 V
+10 dBm
Parameter
Rating
Storage Temperature -55°C to +125°C
Junction Temperature 150°C
Operation of this device above any of these parameters may cause damage.
Parameter
Operating Temperature
Thermal Resistance
Rating
-40°C to +85°C
59°C/W
3236 Scott Boulevard
Santa Clara, California 95054
Phone: [phone]
Fax: [phone]